很久以前买的，资料丢了，不知道是什么芯片了，丝印是24A103TG4 V263-10，有人知道具体型号吗？我在官网上查不到。
2015-06-08 10:13
有做TO-263封装的工厂吗？包装是卷装的如有资源请联系QQ：985379653邀请消息请写TO-263
2013-07-18 09:03
#include #include \"NuMicro.h\" /*---------------------------------------------------------------------------------------------------------*/ /* Macro, type and constant definitions*/ /*---------------------------------------------------------------------------------------------------------*/ /*---------------------------------------------------------------------------------------------------------*/ /* Global variables */ /*---------------------------------------------------------------------------------------------------------*/ void SYS_Init(void) { /* Set PF multi-function pins for XT1_OUT(PF.2) and XT1_IN(PF.3) */ SYS->GPF_MFPL = (SYS->GPF_MFPL & (~SYS_GPF_MFPL_PF2MFP_Msk)) | XT1_OUT_PF2; SYS->GPF_MFPL = (SYS->GPF_MFPL & (~SYS_GPF_MFPL_PF3MFP_Msk)) | XT1_IN_PF3; /*---------------------------------------------------------------------------------------------------------*/ /* Init System Clock*/ /*---------------------------------------------------------------------------------------------------------*/ /* Enable HIRC clock (Internal RC 22.1184 MHz) */ CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN_Msk); /* Waiting for HIRC clock ready */ CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk); /* Select HCLK clock source as HIRC and and HCLK clock divider as 1 */ CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC, CLK_CLKDIV0_HCLK(1)); /* Enable HXT clock (external XTAL 12MHz) */ CLK_EnableXtalRC(CLK_PWRCTL_HXTEN_Msk); /* Waiting for HXT clock ready */ CLK_WaitClockReady(CLK_STATUS_HXTSTB_Msk); /* Enable PLL */ CLK->PLLCTL = CLK_PLLCTL_128MHz_HIRC; /* Waiting for PLL stable */ CLK_WaitClockReady(CLK_STATUS_PLLSTB_Msk); /* Select HCLK clock source as PLL and HCLK source divider as 2 */ CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_PLL, CLK_CLKDIV0_HCLK(2)); /* Waiting for PLL clock ready */ CLK_WaitClockReady(CLK_STATUS_PLLSTB_Msk); /* Enable EPWM1 module clock */ CLK_EnableModuleClock(EPWM1_MODULE); /*---------------------------------------------------------------------------------------------------------*/ /* EPWM clock frequency configuration */ /*---------------------------------------------------------------------------------------------------------*/ CLK_SetModuleClock(EPWM1_MODULE, CLK_CLKSEL2_EPWM1SEL_PCLK1, 0); /* Enable UART module clock */ CLK_EnableModuleClock(UART0_MODULE); /* Select UART module clock source as HXT and UART module clock divider as 1 */ CLK_SetModuleClock(UART0_MODULE, CLK_CLKSEL1_UART0SEL_HXT, CLK_CLKDIV0_UART0(1)); /* Reset EPWM1 module */ SYS_ResetModule(EPWM1_RST); /* Update System Core Clock */ SystemCoreClockUpdate(); /*---------------------------------------------------------------------------------------------------------*/ /* Init I/O Multi-function*/ /*---------------------------------------------------------------------------------------------------------*/ /* Set multi-function pins for UART0 RXD and TXD */ SYS->GPB_MFPH = (SYS->GPB_MFPH & (~(UART0_RXD_PB12_Msk | UART0_TXD_PB13_Msk))) | UART0_RXD_PB12 | UART0_TXD_PB13; /* Set PC multi-function pins for EPWM1 Channel 0~1 */ SYS->GPC_MFPL = (SYS->GPC_MFPL & (~SYS_GPC_MFPL_PC5MFP_Msk)) | EPWM1_CH0_PC5; SYS->GPC_MFPL = (SYS->GPC_MFPL & (~SYS_GPC_MFPL_PC4MFP_Msk)) | EPWM1_CH1_PC4; } void UART0_Init() { /*---------------------------------------------------------------------------------------------------------*/ /* Init UART*/ /*---------------------------------------------------------------------------------------------------------*/ /* Configure UART0 and set UART0 baud rate */ UART_Open(UART0, 115200); } /*---------------------------------------------------------------------------------------------------------*/ /*Main Function*/ /*---------------------------------------------------------------------------------------------------------*/ int32_t main(void) { /* Init System, IP clock and multi-function I/O In the end of SYS_Init() will issue SYS_LockReg() to lock protected register. If user want to write protected register, please issue SYS_UnlockReg() to unlock protected register if necessary */ /* Unlock protected registers */ SYS_UnlockReg(); /* Init System, IP clock and multi-function I/O */ SYS_Init(); /* Lock protected registers */ SYS_LockReg(); /* Init UART to 115200-8n1 for print message */ UART0_Init(); printf(\"\\n\\nCPU @ %dHz(PLL@ %dHz)\\n\", SystemCoreClock, PllClock); printf(\"+-----------------------------------------------------------+\\n\"); printf(\"| EPWM Driver|\\n\"); printf(\"||\\n\"); printf(\"+-----------------------------------------------------------+\\n\"); printf(\"This code will output waveform with EPWM1 channel 0~1.\\n\"); printf(\"I/O configuration:\\n\"); printf(\"EPWM1 channel 0: 100 kHz, duty 40%%.\\n\"); printf(\"EPWM1 channel 1: 100 kHz, duty 60%%.\\n\"); printf(\"Waveform output pin: EPWM1_CH0(D3), EPWM1_CH1(D2),\\n\"); /* Set EPWM mode as complementary mode */ EPWM_ENABLE_COMPLEMENTARY_MODE(EPWM1); /* EPWM1 channel 0~1 frequency and duty configuration are as follows */ EPWM_ConfigOutputChannel(EPWM1, 0, 100000, 40); /* Enable output of EPWM1 channel 0~1 */ EPWM_EnableOutput(EPWM1, 0x3F); /* Start EPWM1 counter */ EPWM_Start(EPWM1, 0x3F); printf(\"Press any key to stop.\\n\"); getchar(); /* Start EPWM1 counter */ EPWM_ForceStop(EPWM1, 0x3F); printf(\"Done.\"); while(1); } 用sample code修改得到了一对互补的EPWM，频率100Hz，占空比是40%和60%，怎么计算技术手册里边的EPWM Period？公式里的PERIOD，CLKPSC，EPWMx_CLK在这里都是多少？uvision里能不能看到对应计数器的动作（用来验证EPWM Period）？
2023-06-16 06:01
`跪求飞思卡尔一款芯片的Datasheet，型号是263 CHINA 25346075！一直找不到数据手册？那些大神知道什么好的找Datasheet的方法吗？求分享！小弟在这谢谢大家了！`
2017-08-26 15:56
A8125M0是什么？A8125M0有哪些特点？A8125M0具备哪些功能？
2021-07-11 07:13
` N沟道mos耐压值大于30VIds电流25℃大于290A 脉冲电流1000A左右，最好大于1000A Ciss小于12000pF内阻在1.6毫欧左右 用在jumpstart保护器上 ，封装TO
2017-12-08 16:56
哪种方式获取数据/文件（例如，大小约为3Gb）到LPA软件更快：M9505A框架 - >通过AXIe背板 - >到M9536A AXIe嵌入式控制器运行LPA软件或M9505A框架
2018-09-20 11:18
XL61019是一款可升压的稳压芯片，TO263-5L封装的芯片理论上最大能承受的功率50W，如果我用来驱动三串二并的LED灯是否可行？单个灯珠电压为3.3V-3.6V，电流是1A。
2018-04-16 16:11
本文按照ITU-T视频编码标准的发展过程，介绍H.261、H.263及H.264。
2021-06-07 06:31
cortex-m3/cortex-m4/cortex-a8的区别是什么？
2021-10-22 06:54
