->LCD_REG = R34; /* Select GRAM Reg *//* Read 16-bit Reg */dummy =
2014-10-15 17:07
-----------------------------------------------------------*/typedef struct{vu16 LCD_REG;vu16 LCD_RAM;} LCD
2018-11-22 09:50
_rw;output lcd_en;output [7:0]lcd_data;reg clk_lcd;reg
2014-09-12 15:23
（）调试打印信息，却导致ucgui对LCD初始化不成功，不屏蔽是正常的void LCD_WriteReg(u8 LCD_Reg, u16 LCD_RegValue){1
2014-04-24 21:52
LCD_RST: NRST 现在我这边配置的地址： 红色的部分对不对？？ #define LCD_REG*(vu8*)(((u32)0x60000000)) #define LCD_RAM*(vu8
2024-04-10 08:02
{:4_97:}module lcd1602(rst,clk,rw,rs,d,e);input clk,rst;output rs,rw,e;output [7:0]d;reg rs,rw,e;//reg[7
2014-04-28 23:24
- all writes goes directly to lcd controller */lcd_write_reg(RESET, 0x0001);delay_nop(10000
2022-04-21 15:18
; delay_ms(500); // delay 20 msLCD_REST=1; delay_ms(300); // delay 20 ms LCD_CS=0;LCD_WR_REG(0xCF
2018-03-15 17:01
我查看nuc970的系列手册，想要将lcd时钟配置为33.3M，我的配置如下： writel((readl(REG_CLKDIVCTL1) & ~0xffff) | 0x818
2023-06-15 07:39
请问为什么用FSMC操作TFT-LCD时，这两句代码LCD->LCD_REG = LCD_Reg; LCD->
2016-11-16 22:32
