英特尔SSD 800P，900P，905P系列的存储介质都是相变存储器，我看到英特尔SSD DC P4800X系列只有128Gb 20nm Intel 3D Xpoint相变存储器。所以我不知道
2018-11-19 14:18
大家好，我有一个有趣的困境，我无法在网上找到任何地方。我有一个三星970 pro 512gb用于启动驱动器，WD Black 4TB Hdd用于存储，而intel optane 800p 58gb用于增强我的4tb驱动器。我的主板是asus maximus x英雄与i7 8700k cpu。我能够正确设置一切。我没有将我的optane内存与我的m.2启动驱动器配对。只是要清楚。这不是一个大问题，但每当我从AHCI切换到RST w / optane支持时，我的三星魔术师软件就会中断并说我的970 pro不受支持。在RST w / optane支持模式下，我仍然可以使用我的三星m.2 SSD启动。我测试了三星ssd的速度，并没有注意到任何性能损失，但是，我不希望我的三星SSD不能正常工作因为三星m.2驱动程序和三星魔术师软件变得一团糟。我把它还原回AHCI（使用安全模式技巧，以免它无法启动），我的M.2再次被三星魔术师软件识别，我可以看到三星m.2的健康状态和固件版本。所以我的问题是，是否可以在AHCI模式下使用optane内存？我没有使用optane和我的启动驱动器，仅用于辅助驱动器。如果我想继续使用optane内存用于我的辅助驱动器，我应该只处理三星魔术师不工作？任何想法和帮助表示赞赏！以上来自于谷歌翻译以下为原文Hey guys, I've got an interesting dilemma that I haven't been able to find anywhere online.I've got a Samsung 970 pro 512gb for the boot drive, and WD Black 4TB Hdd for storage, and intel optane 800p 58gb set to boost my 4tb drive.My mobo is the asus maximus x hero with i7 8700k cpu.I'm able to setup everything properly.I am not pairing my optane memory with my m.2 boot drive. Just to be clear. It's not a huge issue, but whenever I switch from AHCI to RST w/ optane support, my samsung magician software breaks and says my 970 pro is not supported. I'm still able to boot with my samsung m.2 SSD, in RST w/ optane support mode. I tested the speed of the samsung ssd, and didn't notice any performance loss, however, I don't want my samsung SSD to not work properly simply because the samsung m.2 driver and samsung magician software becomes all screwy. I reverted it back to AHCI (using the safe mode trick so that it doesn't become unbootable) and my M.2 was recognized in samsung magician software again, and I could see the health status and firmware version of the samsung m.2. So my question is, is it possible to use optane memory in AHCI mode? I'm not using the optane with my boot drive, only for secondary drive.Should I just deal with samsung magician not working, if I want to keep using optane memory for my secondary drive? Any thoughts and help is appreciated!
2018-12-03 15:33
嗨，我正在通过英特尔网络浏览英特尔NUC 7i5BNH的规格，我看到该系统与以下Optane内存兼容：Intel16GB M.2 PCIe NVMe内存MICPEK1W016GA英特尔验证然而，在通过商店导航找到这样的内存后，我被提供了下一级的Optane内存，即32 Gb。英特尔Optane内存模块32 GB PCIe M.2 80mm MEMPEK1W032GAXT我想知道这个32GB Optane内存模块是否可以与7i5BNH兼容？谢谢。以上来自于谷歌翻译以下为原文Hi, I was surfing through the Intel Web for the specs of the Intel NUC 7i5BNH, and I saw that the system is compatible with the following Optane memory: Intel16GB M.2 PCIe NVMe memoryMEMPEK1W016GAIntel Validated However, after navigatiing through a store to find such memory, I was being offered the next level of Optane memory which is 32 Gb. Intel Optane Memory Module 32 GB PCIe M.2 80mm MEMPEK1W032GAXT I was wondering if this 32GB Optane memory module could be compatible with the 7i5BNH? Thanks.
2018-11-19 14:17
嗨！安装Optane软件时出现0xa001004b错误。我完成了磁盘管理中的缩小卷。什么都没有帮助。我的配置看起来像这样。 M2 Plextor 256 GB（适用于Windows），Toshiba SATA 1TB HDD（用于Optane加速），Optane 32GB内存在第二个M2端口。安装了所有最新的驱动程序。哪个驱动0xa001004b错误关注？系统驱动器（我不想加速）或硬盘驱动器？附加日志。一切都好！IntelOptaneMemory.log.zip 209.8 K.以上来自于谷歌翻译以下为原文Hi! While installing Optane software I got 0xa001004b error. I got through Shrinking Volume in Disk Management. Nothing helps. My configuration looks like this. M2 Plextor 256 GB (for Windows), Toshiba SATA 1TB HDD (for Optane acceleration), Optane 32GB memory on second M2 port. All newest drivers are installed. Which drive the 0xa001004b error concernes? System drive (which I don't want to accelerate) or HDD drive? Log attached. All best! IntelOptaneMemory.log.zip 209.8 K
2018-11-08 11:11
生命之始的混沌云团在风、温度、压力和湿度复杂的相互作用下，逐渐分成了具有不同特性的云层。相似的，在大数据计算和物联网(IoT)的新压力下，今天看起来统一的云数据中心也在发生转变，分成了多个截然不同的层面，包括计算、网络和存储等，从数据中心最核心的地方一直延伸至遍布在真实环境中的各种传感器和制动器。4月份在加州圣克拉拉举行的开放服务器峰会论文中，针对这一发展的“云团”提出了一种独特的断层观点(图1)。 图1. 大气条件合适时，云会分成很多独立的云层。 这种分层结构不太寻常的一个特点是，它不是由集中式计算能力需求推动的——体系结构变化通常的推动力量，而是由数据移动约束造成的。逐渐的，带宽和延时而不是GFLOPS决定了云的大致结构。
2019-07-16 08:36
你好，在阅读我的32GB Intel Optane内存模块的细节时，我注意到一些奇怪的事情：在管理器软件的“配置”选项卡中，它显示“32 GB Intel Optane Memory = 27.3 GB”。缺少的4.7 GB是什么？在“Pinning”（字面翻译）选项卡中，模块利用率总和为（ 1.7系统文件+ 0个固定文件+ 5.4个用户文件+ 0.1个可用空间）= 7.2 GB的总可用空间。再次，丢失的24.8 GB在哪里去了？我是否真的购买了32 GB模块才能使用不到四分之一的模块？最后，在最后一次模块优化之前，我通过“Pinning / Applications”选项卡固定了一些应用程序。但是，专用于固定文件的总空间是0 GB。为什么它不起作用？PS：我是这个论坛的新手，所以请原谅我，如果我没有正确地提出我的问题。谢谢你的帮助，捷德。以上来自于谷歌翻译以下为原文Hello, When reading the details of my 32GB module of Intel Optane memory, I noticed some weird things :In the "Configuration" tab of the manager software, it says "32 GB Intel Optane Memory = 27.3 GB".Where did the missing 4.7 GB go ?In the "Pinning" (translated literally) tab, the module utilisation sums up to (1.7 system files + 0 pinned files + 5.4 user files + 0.1 free space) = 7.2 GB of total available space.Again, where did the missing 24.8 GB go ? Did I really buy a 32 GB module to use less than one fourth of it ?Finally, I pinned some applications through the "Pinning/Applications" tab way before the last optimization of the module. However, the total space dedicated to pinned files is 0 GB.Why is it not working ?PS : I'm new to this forum, so forgive me if I'm not asking my question correctly. Thanks for your help,Zedd.
2018-10-31 17:23
我最近买了一台Gigabyte AORUS Z370 ULTRA GAMING 2.0 ATX主板，预装了32GB Intel Optane Memory。起初我试图让我的ssd驱动器已安装Windows 10，它没有任何。我没有在SSD末端的未分配空间，我只能在驱动器中间取消分配空间。因此，按照一步一步的视频创建一个内置optane驱动程序的Windows安装程序。一切顺利，optane配置为BIOS，安装Windows没有问题，安装了英特尔optane软件，检测并配置驱动器与我的工作启动驱动器。然后我安装了所有其他驱动程序和任何更新。然后我将我的主板BIOS更新为最新版本，然后再次启动到Windows。在启动过程中，在登录屏幕之前在屏幕上瞥见一条消息。我不知道它说了什么，它来了，快去读。然后我登录到Windows并且optane内存软件提出了一条消息，说“您的系统不支持Intel optane - 未满足以下要求：X没有用于Intel Optane™内存的兼容磁盘.. Windows设备管理器具有：Intel （R）Chooser SATA / PCIe RST Premium控制器作为存储控制器，没有其他..此外，安装窗口和配置optane驱动器工作后安装的所有东西都不再安装。在设置optane驱动器后不久，Windows记录的最后一件事是Windows更新。所有驱动程序，软件和下载都消失了。无论如何，我现在找不到或得到optane在Windows工作。如果我在BIOS中禁用optane并尝试使用普通的SATA控制器启动，Windows将无法启动（BSoD）......这是可修复的，还是我将不得不再花5到6个小时观看该视频，进行另一个自定义使用optane驱动程序启动USB磁盘和自定义Windows 10安装程序，然后重新安装所有内容？以上来自于谷歌翻译以下为原文I recently bought a Gigabyte AORUS Z370 ULTRA GAMING 2.0 ATX Motherboard with 32GB Intel Optane Memory pre-installed. At first i tried to get my ssd drive with windows 10 already installed and it wasn't having any of it. I didn't have the unallocated space at the end of the SSD, and I could only unallocate space in the middle of the drive. So after following the step by step video to create a windows installer with optane drivers built in. Everything went fine, optane was configured in bios, windows installed with no issues and the Intel optane software installed, detected and configured the drive to work with my boot drive. I then installed all other drivers and any updates. I then updated my motherboards bios to the lastest version and then booted up into windows again. During the boot a glimpsed a message on their screen right before the login screen. I don't know what it said, it came and went to fast to read. I then signed in to windows and the optane memory software came up with a message saying 'Your system is not Intel optane ready - the following requirements were not met: X No compatible disks for Intel Optane ™ memory .. windows device manager has: Intel(R) Chooser SATA/PCIe RST Premium Controller as the storage controller, nothing else.. Also, everything installed after installing windows and configuring optane drive to work, wasn't installed anymore. The last thing windows logged was a windows update not long after setting up the optane drive. All drivers, software and downloads were gone. Anyway, I now can't find or get optane to work in windows. And if I disable optane in bios and try booting with normal SATA controllers, windows won't boot (BSoD)... Is this fixable, or am I going to have to spend another 5 - 6 hours watching that video, making another custom bootable u*** disk and custom windows 10 installer with optane drivers, and then reinstalling everything again?
2018-10-23 10:47
