PassMark \"USB3 测试插头 \"显示 \"已枚举 USB3\"。 如果我使用 Corsair Flash Voyager Slider X1
2024-07-05 06:43
海全， 我想知道，如何将用户数据（如.bin或.hex文件）存储在闪存中以及如何从闪存中访问相同的数据，将其提供给用Verilog编写的程序的某个模块？ 我是新来的，请让我知道谢谢以上来自于谷歌翻译以下为原文Hai all, i want to know , how can i store the user data like .bin or .hex file in flash memory and how tothe access the same data from flash give it to some module of which program written in Verilog ?? i am new to all this kindly let me know thanks
2019-04-22 06:49
你好，我在其中一个ZC702版本1.1板上遇到问题。 DS2红灯亮，似乎FPGA无法初始化。它工作正常，但经过几个电源循环后，LED LED指示灯亮起并且从未工作过。任何帮助，将不胜感激。谢谢以上来自于谷歌翻译以下为原文Hello, I am having issue on one of the ZC702 version 1.1 board. The DS2 red light is on and seems like the FPGA failed to init. It was working fine but after few power cycle the RED LED came on and never worked. Any help would be appreciated. Thank You
2019-05-05 12:22
我遇到了加载和显示图形包的问题。VM正在运行使用PCI Pass-through的RHEL 7 VM我创建了一个Linux RHEL x64 VM。我能够通过PCI激活VM的M5000 GPU。当VM引导时，通过PXE菜单加载修改的XORG RHEL OS。我可以看到操作系统负载，因为VM屏幕上显示了几条消息。它继续，然后它停在消息：“启动OpenSSH服务器守护进程”看看Xorg.log，我看到如下消息：NVIDIA GLX Module 390.25 ....正在加载/usr/lib/xorg/modules/drivers/nvidia_drv.so适用于所有支持的NVIDIA GPU的NVIDIA Unified Driver使用VT编号1未检测到设备致命服务器错误没有找到屏幕我不确定这个专业操作系统运行的是什么，但它加载到物理服务器上并且可以工作。关于我需要添加或修改以使操作系统加载并运行图形到VM屏幕的任何想法？以上来自于谷歌翻译以下为原文I am having an issue with getting a VM to load and display a graphics package.The VM is running RHEL 7 VM that is using PCI Pass-throughI created a Linux RHEL x64 VM. I was able to activate the M5000 GPU for the VM via PCI.When the VM boots, a modified XORG RHEL OS is loaded via a PXE menu.I can see the OS load as there are several messages being displayed on the VM screen.It continues and then it stops at the message:“Started OpenSSH server daemon” Looking at the Xorg.log, I see messages such as:NVIDIA GLX Module390.25 ....Loading /usr/lib/xorg/modules/drivers/nvidia_drv.soNVIDIA Unified Driver for all Supported NVIDIA GPUsUsing VT number 1No device detectedFatal Server ErrorNo screens foundI am not sure what this specializedOS runs, but it loaded on physical server and works.Any ideas on what i need to add or modify to get the OS to load and run the graphics to the VM screen?
2018-09-06 09:56
