VITAL compliant library是什么意思
2019-02-15 11:30
anyone please confirm? we are going to production now and this info is vital. Cheers!
2018-12-04 16:20
but there is no description of how to confingure the registers! Any one know where ST have hidden this vital
2018-11-28 10:29
ended? it's vital to know the answer in continous control transfer while repeated inquring a status
2019-03-22 14:32
大家好，我在用Pickit 3编写dspic33fj128mc804 PIM时遇到了问题。到目前为止，我做了如下工作：(1)我用PK3创建了一个项目。(2)我连接了从PK3到PIM的下列管脚：PK3管脚1=/MCLR，PK3管脚2=VDD，PK3管脚3=GND，PK3管脚4=PGED3，PK3管脚5=PGEC3(有一个小三角形)。（3）我给PIM的pin2提供了独立的3.3V。（4）我还通过PGEC3/PGED3端口配置了处理器：#pragma config ICS=1//Program。VDD）。你必须连接到一个目标设备使用皮卡3。我在这里丢失了什么？有什么想法吗？任何小费都是值得赞赏的。当心。 以上来自于百度翻译 以下为原文 Hi guys,I am having problems in programming dspic33fj128mc804 PIM with Pickit 3.What I did so far is as follows:(1) I created a project with PK3.(2) I connected the following pins from PK3 to the PIM:PK3 pin1=/MCLR, PK3 pin2=VDD, PK3 pin3=GND, PK3 pin4=PGED3, PK3 pin5=PGEC3 (there is a little triangle on PK3 that tells me where pin1 is).(3) I supplied a separate 3.3V to the PIM's pin2.(4) I also configured the processor with:#pragma config ICS=1// Program through PGEC3/PGED3 portsNow, I am getting the following message from mplabx:Target device was not found (could not detect target voltage VDD). You must connect to a target device to use PICkit 3.What am I missing here?Any ideas??Any tip is appreciated.Take care.
2019-05-24 10:25
===========当我在modelsim中运行它时，我收到一条错误消息：在C：/Xilinx92i/vhdl/src/unisims/unisim_VITAL.vhd第6272行处理
2019-08-15 10:07
as the reliable automated lengthy measurement (well over 24 hours) is vital for our purpose. Thank you. Steve
2019-10-14 11:12
我用IPE将十六进制文件（4.46K）下载到MCU中，总时间大约144秒，速度太慢，如何提高下载速度？ 以上来自于百度翻译 以下为原文I download the hex file (4.46k) into MCU by IPE, the total time is about 144 second, it's too slow, how can i improve the download speed? Attached Image(s)
2018-09-26 17:22
在做USB传输时，有没有显示出如何使用DMA模块的和声样本？谢谢您！克里斯 以上来自于百度翻译 以下为原文 Are there any Harmony samples that show how to use the DMA module when doing USB transfers? Thank you!Chris
2019-02-19 15:07
and ref design I don't know which pin definition of S-14 is vital?the below code is some part
2019-03-12 13:13
