怎么改善基于HQV Vida处理器的HDTV图像质量？
2021-06-04 06:47
Vida™ 处理器芯片，将业界领先的好莱坞质量视频处理技术推向一个新的性能水平，显著改善了消费者的观赏体验。
2019-08-26 07:02
我安装的labview2018，下载的vida18.5
2019-05-22 14:43
新一代HQV视频处理器能否改善低质量视频？
2021-06-08 06:29
%；--------------------------------；[Stult]提供者=“CyPress”MFGAME=“CyPress”CysBuSuth= =“CyPress通用USB驱动安装盘”VIDA
2019-03-21 11:02
-EEPROM遗失”VIDA04B4＆PIDY8614.DEVICESDESC =“CyPress USB通用驱动程序（3.4.6000）” 以上来自于百度翻译 以下为原文Windows 7
2019-03-28 06:23
您好，我有大量的数据要从FPGA转移到FX3，然后转到PC（一个方向）。目前，我们的FPGA系统还在设计中。我计划将相关的GPIF引脚连接到GND或VCC来测试SLaveFIFOASYNC示例。那么，在这种情况下，我如何检查数据传输的吞吐量（我在USPBulkSuxink的Link示例中使用了拖缆）？谢谢，乐华晨 以上来自于百度翻译 以下为原文Hello, I have large amount of data to be transferred from FPGA to FX3 and then to PC (one direction). At present, our FPGA system is still in design. I plan to connect the related GPIF pins to GND or VCC to test the SlaveFifoAsync example. Then how could I check the throughput of the data transfer in this case (I did it in the USBBulkSourceSink example with Streamer)?Thanks, Lehua Chen
2019-04-28 11:40
亲爱的PSoCo开发者我正在尝试建立PSoC 3和PC之间的通信。我使用的是来自主机端的LIUSB总线1。我能够找到设备（PSoC 3）并从设备中获取USB解析器，但是我不能改变PSoC的USB描述符（例如供应商ID、产品ID、接口数量）。我正试图通过使用USB PSoC Creator（USB全速）组件来改变USB描述符。但是在主机（PC）中，我总是得到相同的USB描述符。我的目的是发送和接收来自PSoC的SOM数据。为什么我总是得到相同的描述符，即使我在UBFS组件中改变它？如果有人能帮助我，我将非常感激。最好的问候，古尔根 以上来自于百度翻译 以下为原文Dear PSoCDevelopers I'm trying to establish communicationbetween PSoC 3 and PC. I'm using libu*** 1.0 from Host side. I was able to find the device (PSoC 3) and get USB descritors from the device, but I cannot change the USB descriptors of the PSoC (for example Vendor ID, Product ID, number of interfaces). I'm trying to change USB descriptors using PSoC Creator by programming USBFS (USB full speed) component. But in the host (PC) I'm always getting the same USB descriptors. My purpose to send and receive som data from the PSoC. What can be the reason that I'm always getting the same descriptors, even I'm changing it in the USBFS component? I'd really appreciate, if someone could help me Best regards, Gurgen
2019-06-12 10:05
