# include # include unsigned int temperture[]={49,46,48,48,45,0};unsigned int smg_8_show[]={0x81
2014-04-14 15:44
;temperture is %d.%dC\n",125/10,125%10 );printf(" %d-%d-%d ", 2014, 2, 1 );printf(" %s
2019-02-12 22:55
temperture data aquisition system. During this time the 3458A is reading ohmf on approx. 300multiplexed
2019-06-03 15:24
;parameter T10S = 8'd10;parameter T20S = 8'd20;//temperture search zero point//parameter EXPERIENCE = 14
2017-12-23 18:13
(DS18B20_Read_Temperture()); }}ds1302#ifndef _DS1302_H_#define _DS1302_H_#include #include
2017-05-05 16:08
: Lcd_Temperature( uchar * temperture )* 功能: 显示温度* 入口参数: 温度* 出口参数: 无
2016-05-07 15:47
大家好！我使用Agilent 34970A长时间使用34901A多路复用器和使用经典的Benchlink软件记录TC温度数据。现在我需要迈出新的一步。我想买一台34903A执行器并用它来控制一个实验：我会试着简单地描述它。我正在记录10个不同的TC温度（来自34901A）。当其中一个温度达到一定值时，系统必须自动关闭执行器上的某个通道（以便制冷系统启动......）。当温度回到选定值以下时，执行器上的通道必须再次自动打开。我认为标准的Benchlink软件通过命令“工具>开关控制”或使用警报为我做了这个简单的操作，但有人告诉我学习使用Command专家可能很有用。是否有可能使用这两个软件之一编写我在此描述的简单操作？编辑：Frenky77于2012年4月16日下午12:43我在Benchlink软件上找到了关于“开关控制”工具的以下句子：“您可以将开关配置为打开或关闭以响应警报。“开关控制”对话框显示这些基于警报的操作。“在“警报属性”部分中，还有其他有关在34903A模块上打开或关闭通道的有用信息。 以上来自于谷歌翻译 以下为原文Hello everyone! I'm using an Agilent 34970A for a long time to log TC temperatures data with a 34901A multiplexer and using the classic Benchlink software. Now I need to do a new step. I'd like to buy a 34903A Actuator and use it to control an experiment: I'll try to simply describe it. I'm logging 10 different TC temperature (from the 34901A). When one of these temperature reaches a certain value the system must automatically close a certain channel on the actuator (so that a refrigeration system starts...). When the temperature goes back below the choosen value the channel on the actuator must be automatically opened again. I thought that the standard Benchlink software make this simple operation for me with the command "Tools>Switch control" or using the alarms but someone told me it could be useful to learn to use the Command expert. Is it possibile to program the simple operation I described here with one of the two softwares?Edited by: Frenky77 on Apr 16, 2012 12:43 PM I found on the Benchlink software help the following sentence about the "Switch control" tool: "You can configure a switch to open or to close in response to an alarm. The Switch Control dialog box shows these alarm-based operations." In the Alarm properties section there are other useful info about opening or closing channels on a 34903A module.
2019-09-04 08:34
嗨，目前我正在寻找支持10位硬件输出技术的VDI的vGPU板，取自AMD网站（https://www.amd.com/Documents/10-Bit.pdf）。该解决方案用于读取需要10位硬件输出技术并在VDI和至少3K分辨率下运行的医学放射图像，目前我们使用的ATI FirePro工作得很好，但我们需要转向VDI解决方案。NVIDIA GRID是否支持此解决方案？谢谢！以上来自于谷歌翻译以下为原文Hi, currently i'm looking for vGPU board for VDI that support 10bit hardware output technology, taken from AMD site (https://www.amd.com/Documents/10-Bit.pdf).The solution is for reading medical radiology image that need 10bit hardware output technology and running on top of VDI and at least 3K resolution, currently we are using ATI FirePro works great but we need to move to VDI solution.Does NVIDIA GRID support this solution? Thanks!
2018-10-10 16:12
你好。我的大问题是cpscon，这取决于温度。天气凉爽时敏感度低，天气暖爽时敏感度太高。为什么？我用的是内部振荡器，但没有任何变化！！！！！！！为什么？我该怎么办？？？？ 以上来自于百度翻译 以下为原文 hi. my big problem is cpscon that is dependon temperature.when weather be cool sensitivines be low and when weather be warm sensitivines be too high. why?? I used from internall oscillator but don't any change!!!!!why?? how can I do???
2019-05-30 11:08
