();DelaySec(1);//??Uart1Sends("AT+CPIN?\r\n");//?????????DelaySec(1);//??i=0;while(!hand
2016-08-19 12:06
stops to receive any data.He tried to make a simple test. Test sends UDP 1024 bytes packets
2018-10-29 11:12
Send(uchar c);void Sends(uchar *str);void Delay(int z);void ATD();void ATH();void ATA();void GPRS
2015-01-12 21:23
]=tmp2;//短信的内容都存在rev_buf2中了if(num2>=80){num2=0;//Uart1Sends("GSM B "); 以上全试过可以发送7/23，20
2015-02-23 15:07
没有剩余空间，有什么办法可以使散装输出不被发送吗？ 以上来自于百度翻译 以下为原文Hello,I have a system where a user mode application sends
2019-06-10 06:27
Uart1Sends(uchar *s){while(*s!=''){Uart1Send(*s++);}}//延时函数大概是1s钟，不过延时大的话不准...void
2017-06-22 14:16
sends this. After the command, HID cannot send a report, but UVC works normally. If I start UVC
2018-09-29 15:57
= SMCLK_FREQ / 9600; UCA1MCTL= UCBRF_3 + UCOS16; UCA1CTL1 &= ~UCSWRST;}void Uart0Sends(char *s){ while(*s
2017-01-17 13:16
and the host sends some class specific requests. I have added some code to CyFxUVCApplnUSBSetupCB
2019-06-04 16:01
enum { /* camera sends byte sequence: s1, s2, s3, s4, ...* fifo receives: 00 s1 00 s2, 00 s2 00 s3
2023-03-07 08:00
