with this scales settings . I am using not an STM32 to drive the sensor but I am free to share all my settings
2018-10-25 10:55
high and low bytes into a 12 bit value and using 195mg/digit to convert data into scales of +/- 400g
2018-10-09 11:46
in scales of 1, 8, and 16 using the K220Q vGPU profile (2x NVIDIA GRID K2 cards), then one more test where
2018-09-04 15:18
explain to me how to calculate the correct acceleration values in mg for various resolutions and scales
2019-04-22 16:38
amplitude. But the real problem is the way the 33120 scales output by the peak-to-peak range
2019-02-14 12:50
在我们使用FL制作音乐时，乐理是必不可少的制作基础，本篇教程将结合FL Studio为大家讲解基础乐理及在FL Studio20中的使用技巧。
2020-10-27 11:41
我已经拥有这个单位。是否有计划升级固件以支持更高的电容测量范围？目前它仅限于大约10uF的高端产品系列。我们正在测量电解电容器（例如1000 uF和更大）并且很惊讶地意识到这个范围的高端限制。我不知道是否需要进行电路修改，但我希望安捷伦数字万用表产品管理团队可以对此进行研究，看看是否有任何方法可以通过固件更新来扩展测量范围。例如，与TEK DMM4050或Fluke 8846A相比，这些价格相对较高的单元具有非常宽的电容测量范围（在Fluke的情况下高达0.1F范围），这更符合我的预期来自安捷伦的顶级台式DMM。我对这个单元感到满意，但是如果可能的话，我很乐意看到电容范围扩大了固件更新。谢谢！ 以上来自于谷歌翻译 以下为原文I already own this unit. Are there any plans to upgrade the firmware to support higher capacitance measurement ranges? Currently it's limited to approximately a 10uF top-end range. We're doing measurements of electrolytic capacitors (e.g. 1,000 uF and larger) and were surprised to realize the limit on the high-end of this range. I don't know whether a circuitry modification would be required, but I'm hoping that the Agilent DMM product management team could look into this and see if there's any way to extend the measurement range with a firmware update. In comparing to the TEK DMM4050 or Fluke 8846A, for example, those units, which are comparably priced, have a very wide capacitance measurement range (up to 0.1F range in case of Fluke) which is more in line with what I would expect for a top of the line bench top DMM from Agilent. I am happy with this unit otherwise, but would love to see the capacitance range extended with a firmware update if possible. Thank you!
2019-09-10 08:45
;// quantity of measured data // initialization of oscilloscope: reset, set trigger, scales, timebase... // main() { for(j=0;j
2019-04-28 14:33
你好xilinx未来版本支持无约束的记录数据类型。我现在使用的10.1不支持它？Modelsim也不支持它。例如：类型Complex_Data_Typ记录是RE：签名;IM：签名;结束记录;以上来自于谷歌翻译以下为原文Hi Is unconstrained record data type supported in xilinx future version. It was not supported in 10.1 which I use now?It is also not supported in Modelsim.Eg:type Complex_Data_Typ record isRE: signed;IM : signed;end record;
2019-01-11 10:38
我想绘制扫描系统模拟的结果，其中包含系统参数的几种变化。当您执行另一个系统分析时，如何防止先前系统分析的结果被删除。关于保留旧结果，我在图表属性中看不到任何内容。如何将每个数据集导出为excell或者其他东西。 以上来自于谷歌翻译 以下为原文I want to plot the results of a swept system simulation with several variations on the system parameters. How do you prevent results from a previous system analysis from being erased when you do another. I don't see anything in graph properties about keeping old results. How do I do this short of exporting each dataset to excell or something.
2018-12-10 16:33
