• 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
返回

电子发烧友 电子发烧友

  • 全文搜索
    • 全文搜索
    • 标题搜索
  • 全部时间
    • 全部时间
    • 1小时内
    • 1天内
    • 1周内
    • 1个月内
  • 默认排序
    • 默认排序
    • 按时间排序
  • 全部板块
    • 全部板块
大家还在搜
  • TMDS181 Redriver 4k@60黑屏问题

    请教TMDS181 Redriver芯片相关问题: 现象:4k@60分辨率黑屏,4K@30分辨率正常,将DDC路径有监听改为经过TMDS181之后,异常消失 想了解:1、DDC在握手时,有包含TMDS信号的寄存器信息吗,2、有什么工具可以把TMDS181寄存器值全部抓出来

    2023-07-28 15:11

  • USB 3.0接口应用的设计考虑因素有哪些?

    如何用USB ReDriver延长USB信号的传输距离?选择USB开关时需要考虑的关键参数有哪些?

    2021-05-21 06:23

  • 请问如何测试转接驱动器PTN38007的4通道?

    ;gt; Fixture1 / Redriver / Fixture2 -> Scope(MSO73304DX)

    2023-05-12 06:47

  • 差分对与过孔有关的四件事

    retimer和redriver。它们有助于减轻和缓解所有类型差分对的缺陷和高插入损耗,从而实现先进系统中的可靠数据通信并扩展传输距离。请在下方留言—我很想听一听你对这篇帖子的反馈,或者是你希望从以后的“差分对

    2018-09-11 11:22

  • 对差分对有哪些要求?如何去设计差分对?

    对于差分对有哪些要求?如何去设计差分对?

    2021-05-20 06:15

  • 浅谈差分对

    (Redriver)。它们在解决所有类型实际差分对设计时碰到的不理想情况,和高插入损耗情况大有帮助,从而在现代系统中实现了可靠数据通信并延长了传输距离。来看一看与TI的LVDS/MLVDS/ECL/CML

    2018-09-11 11:50

  • 分享一款Xavier载板硬件方案

    EFM8SB10F8G是什么?如何去制作一种19V/3.42电源适配器呢?

    2021-11-01 06:30

  • 不能通过回音命令与微控制器进行通信

    大家好,我正在使用PIC32 MX795F512L微控制器和使用USB接口与外部PC通信。CLI接口,我用来配置一些组件或读取,例如电压或温度在Windows PC上使用超终端工作。我也使用Linux。Ubuntu和MINICM的所有工作都很好,就像我的Windows PC.上的超级终端一样,微控制器通过USB连接到Linux PC,在/DEV/I下可以通过TTYACM0找到它们。我想通过微控制器的CLI配置PCI的一些改写器,因为它需要一个大量的时间每字节做这个字节,我想编程一个小的BASH文件来自动配置重发器。我的问题是,我不能通过回音命令与微控制器进行通信,例如ECHO’TEMP’/GD//DEV/TTACACM0,并通过CAT/DEV/TTYA显示微控制器的输出。我的问题是:如何在不使用MICICOM的情况下通过终端与微控制器进行通信。我希望论坛上的任何人能在这方面帮助我。 以上来自于百度翻译 以下为原文 Hi everyone, I'm working with a PIC32MX795F512L microcontroller and using the USB interface to communicate with an external PC.The CLI interface which I use to configure some componentes or to read out e.g. voltages or temperatures works fine withHyperTerminal on a Windows PC. I use also Linux e.g. Ubuntu and with Minicom everything works fine as with HyperTerminal on my Windows PC. The microcontroller is connected via USB to the linux PC and under /dev/ I can find them via ttyACM0.I want to configure some redrivers for PCIe via my CLI from the microcontroller, due to the fact that it needs a lot of time do this byte per byte I want to programm a small bash file to configure the redrivers automatically. My problem is that I can not communicate with the microcontroller via echo commands e.g. echo 'temp' > /dev/ttyACM0 and to display the output from the microcontroller via cat /dev/ttyACM0. My question is: How can I communicate with the microcontroller via terminal without using minicom.I hope anyone here on this forum plattform can help me at this matter. Thanks in advance.ChrisBr

    2018-12-29 16:04

  • USB 3.0相对于USB 2.0数据传输速度快上10倍?

    USB 3.0相对于USB 2.0数据传输速度快上10倍?

    2021-05-24 07:24