and a slot on the receptacle for it. It’s a two pin connector and the connections are labeled 1
2018-10-26 14:45
Micro-AB型插座 1、USB 3.0 A型USB插头（plug）和插座（receptacle） 引脚顺序（左侧为Plug，右侧为Receptacle）： 引脚定义： 封装
2015-06-19 14:26
感谢， 以上来自于百度翻译 以下为原文I am designing a displayport sink with UFP USB TYPE C receptacle. Purpose
2018-09-30 15:03
Windows 10，尝试了三台机器，十几个不同的端口（直接，电源集线器，USB 2）。USB 3等），在编程或调试会话之后删除MPLAX 4.15的唯一方法是通过调试菜单中的硬件引导紧急启动固件恢复过程。我应该添加PIKIT 3、ICD 3、实际ICE和I。CD 4都在MPLAX X 4.15上进行枚举和工作。 以上来自于百度翻译 以下为原文 Windows 10, tried on three machines, a dozen different ports (direct, powered hub, USB 2.0. USB 3.0 etc), the only way I can get it to properly enumerate and be recognised by MPLAB X 4.15 after removing it following a programming or debug session is to go through the Hardware Boot Emergency Boot Firmware Recovery procedure in the Debug menu. I should add that PICkit 3, ICD 3, Real ICE and ICD 4 all enumerate and work as expected with MPLAB X 4.15 on these machines.
2018-10-25 16:49
receptacle. In the parts list, it's listed as Digilent 161-026, but that company doesn't seem
2019-03-19 15:22
USB3.0物理层一致性测试挑战是什么？如何进行通道去嵌？
2021-05-08 07:27
你好，需要知道的是，必须选择什么样的标准来选择将携带交替模式数据IGB-DP、USB 2和PD（12V/3.0A）的UB-C电缆。我想用CGXX（GE2）套件代替EMCA板。这些数据将有助于了解市场电缆是如何流动的以及需要考虑的因素。正如我所看到的，它们中的大多数都是用于手机充电的。谢谢您， 以上来自于百度翻译 以下为原文Hi , Need to know, what criteria one has to consider to pick USB-C cable that will carry alternate mode data ie DP,USB 2.0 and PD(12V /3.0A). I want to use with CCGXX(Gen2) kit instead of EMCA board. This data will help to understand how in market cable are floating and factor that need to be consider.As i see most of them are meant for charging used with Mobile. Thank you,
2018-10-15 15:22
我有ACY8C2494芯片（QFN68）。我知道我可以用MixPrim1设备连接到我的PC上编程它，但是我如何将MICROPRO1与CYY8C2494接口呢？是否有适配器可用，如果有的话，我在哪里可以找到它们？ 以上来自于百度翻译 以下为原文I have a CY8C24994 chip (QFN68). I understand that I can program it using a MiniProg1 device connected to my PC. But how do I interface the CY8C24994 with the MiniProg1? Are there adaptors available and if yes, where can I find them?
2019-07-05 06:48
你好呀！我有一个有趣的问题，让我有点难过。我从来没有真正能够很好地掌握三通开关的功能。我有一个客户希望使用按钮开关作为3路。有人知道这是否可行以及它如何起作用？客户目前正在使用交换机432-1212-ND，如果不使用这个交换机，我希望至少保留这种风格。以上来自于谷歌翻译以下为原文Howdy Ya’ll! I have an interesting question that has me a little stumped. I have never really been able to grasp the function of a 3-way switch very well. I have a customer looking to use a pushbutton switch as a 3-way. Anybody know if this is possible and how it might work? The customer is currently using switch 432-1212-NDand would like to at least keep this style if possible if not use this very switch.
2018-10-22 14:34
我正在寻找这些Molex式连接器的识别。我已经与Molex联系了，他们告诉我这些不是他们的。小连接器上的间距是3/32“。大的间距是1/2”。谢谢！乔以上来自于谷歌翻译以下为原文I’m looking for an identification of these Molex-style connectors.I’ve already been in contact with Molex and they inform me these are not theirs.The pitch on the small connectors is 3/32".The pitch on the large is 1/2".Thanks!Joe
2018-10-23 11:42
