在semaphore2手册中有如下图 而在cslr_sem.h文件中有如下定义 /*----SELECT_INTERRUPT_REARM Tokens----*/ #define
2018-06-21 11:54
; TMR3 = 0; OC1TMR = 0; OC1CON1bits.OCM = 4;// Rearm a new output pulse T3CONbits.TON = 1
2019-02-19 09:38
ECap1Regs.ECCTL2.bit.REARM = EC_ARM; ECap1Regs.ECCTL2.bit.TSCTRSTOP = EC_RUN;// 启动 ECap1Regs.ECCTL2.bit.STOP_WRAP
2019-09-01 14:00
Counter ECap1Regs.ECCTL2.bit.REARM = 1;// arm one-shot ECap1Regs.ECCTL1.bit.CAPLDEN = 1; // Enable
2018-06-14 06:09
). The ESC also requires the throttle to be in the neutral position to rearm the ESC after:Loss
2017-08-23 11:38
大家好，我正在研究STM8AL3166并尝试处理定时器中断。我需要等待500ms，然后再检查一个值（不合并）中断发生时如何/在哪里编写程序？我在哪里可以找到头文件？我做了几个小时的搜索，找不到任何东西，请帮忙！谢谢，大卫 ＃timer-interrupts #delay以上来自于谷歌翻译以下为原文 Hello Everyone,I am working on the STM8AL3166 and try to handle a timer interrupt. My need is to wait 500ms and then check again a value (not pooling)How/Where do I write the program when the interrupt occurs? Where can I find the header file?I did several hours of searching and can not find anything, Please Help !Thank,David #timer-interrupts #delay
2018-10-23 16:56
