;}break; case 3: /*收到组地址*/if (var1 == ADDRESS[0]){serial_flag = 4;prec_num = 1;prec_buf[0] = var1
2018-07-02 06:13
;}break; case 3: /*收到组地址*/if (var1 == ADDRESS[0]){serial_flag = 4;prec_num = 1;prec_buf[0] = var1
2018-07-06 00:38
*/ p_cordic_init.prec = 4<<4; /* 迭代4x2=8次 */ Cordic_Init(CORDIC,&p_cordic_init
2025-06-27 23:55
BH1750_RSRC_INDEX_ADDR 1 #define BH1750_RSRC_INDEX_PREC 2// H-Resolution Mode/H-Resolution Mode2/L-Resolution
2023-12-01 22:55
CubeMX自动生成的代码！也就是下次再次使用CubeMX生成代码时不需要再次瞎捣鼓一番来使能FPU！在这里，重新帮大家捋一遍。在STM32CubeMX生成工程后，在Keil中打开工程，首先确认配置界面Target选项卡中的Floating Point Hardware为Single Prec
2021-08-24 07:24
;, C2&Dim A1%, PreC1&Dim LeftValue%, A1Shift%If BDF = 0 Then CalCRC = 0 Exit FunctionEnd IfA1
2011-12-02 23:47
'String' ，代码如下：char *dtostrf (double val, signed char width, unsigned char prec
2015-10-29 14:17
? 原文链接：https://e2e.ti.com/blogs_/b/prec ... -the-reference-path
2019-07-25 04:45
4\'b0011 `define RD4\'b0101 `define WR4\'b0100 `define BT4\'b0110 `define PREC4\'b0010 `define REFR4
2023-03-23 17:40
: Rdunning /scripts/local-prec-mount k... eys/input/input2 [10.389279] input: gpio-keys as /devices
2024-01-30 11:16
