你好，我在我的实际项目中使用的是STA311b DSP，我想知道powersupply校正是如何工作的？我找不到有关此功能的任何详细信息。在这种情况下，如何连接ADC？你有这样的样本shematic吗？ 提前致谢， 最好的祝福 伯恩哈德
2019-08-09 08:12
both powersupply pins in controller with 2.75v... Is their any relationship between the powersupply
2019-06-12 09:01
currentlimit on the lab powersupply, and when everything works I'll move to a LIPO battery that limits
2018-11-14 17:12
要迁移，sourceId：120827 以上来自于谷歌翻译 以下为原文to be migrated, sourceId: 120827
2018-09-25 14:52
嗨，我正在创建一个Visual-C ++应用程序，它通过IVI-COM驱动程序接口自动化安捷伦电源。此应用程序旨在用于不同的位置，用户可能使用不同的Agilent电源模型。因此，我的应用程序应该可以互换，因此用户可以选择他拥有的特定Agilent PS型号，并且特定的驱动程序将动态链接到我的应用程序。我的用户将无法访问源代码，但只有一个关闭的可执行文件。阅读本文后：http：//ivifoundation.org/downloads/IVI% ... 202011.pdf我注意到这可以通过IVISessionFactory.I安装了IVI共享组件。但是，我似乎没有C：\ Program files \ IVI Foundation \ IVI \ Data下的任何内容，因为该文档声称它应该包含IviConfigurationStore.xml.Moreover，我不知道看看我如何创建这个工厂的实例。我很乐意得到一些C ++代码示例，展示这个以及有关IVISessionFactory以及如何将其绑定到特定工具的更多解释。谢谢，Hagai。 以上来自于谷歌翻译 以下为原文Hi,I'm creating a Visual-C++ application which automating an Agilent Power Supply via IVI-COM driver interface.This application is intended to be used on different locations, where users might have different Agilent Power supplies models.Therefore, my application should be interchangeable so the user can choose the specific Agilent PS model he owns,And and the specific driver will be dynamically linked to my application. My users won't have any access to the source code but only having a close executable file.After reading this:http://ivifoundation.org/downloads/IVI% ... 202011.pdfI've noticed this could be achieved via IVISessionFactory.I have IVI Shared Components installed.However, I don't seem to have anything under C:\Program files\IVI Foundation\IVI\Data as the document claims it should contain the IviConfigurationStore.xml.Moreover, I don't see how can i create an instance of this factory. I will be happy to get some C++ code examples showing this and some more explanation about the IVISessionFactory and how to bind it to the specific instrument.Thanks in advance,Hagai.
2019-05-22 09:28
1，是否可以输出扫频时间4微秒的40～65MHz的上扫频线性调频信号2，能否实现触发高电平上扫频，低电平下扫频3，杂散能否达到80dbc4，设置是不是只能通过u***口，利用上位机设置5，供电电流电压是多少 P.S. 我只需要实现输出扫频时间4微秒的40～65MHz的上扫频线性调频信号，需要触发高电平上扫频，低电平下扫频，并且杂散能否达到80dbc。有没有简单一些的ad9958的板卡。
2019-02-26 11:15
then 1A being drawn from the powersupply. I measured the output current which a constant current load.
2019-01-21 16:06
嗨，我们有一些问题在启动，由于启动时间的PIC，在大约80毫秒。在这种情况下，图片是PIC18F97J60，但是我看到过去使用的其他PIC24图片具有相同的启动时间。是否存在一些启动更快的PIC系列？谢谢 以上来自于百度翻译 以下为原文 Hi, We have some problems on the startup due to the boot time of the PIC that in about 80 msec. In this case the pic is PIC18F97J60 but I see that also other PIC24 pics used in the past has the same boot time. Do exists some PIC family that startup faster ? Thanks
2019-06-13 08:36
你好，我试图传输大文件（大于1MB）与FX2LP。其实，我只是跟着an61345（实施FX2LP™FPGA接口）。它在EZ-USB的控制台，512个字节发送到EP2、512字节到6。然后我用VC6制作了一个应用程序。将大文件的512个字节的数据包，并将其通过xferdata()功能。代码是对于（i＝0；i＆lt；pCube；i++）{对于（j＝0；j＆lt；BuffyStand；j++）{UBSI i [j]＝Siguii [ BuflSige *i+j]；}如果（UBS-设备-gt；BulkouTrPT）i_finish =设备- >；bulkoutendpt - >；xferdata（u***_i，buf_size）；如果（UBS-设备-gt；BurknEntPt）o_finish =设备- >；bulkinendpt - >；xferdata（u***_o，buf_size）；对于（j＝0；j＆lt；BuffyStand；j++）{Sigio[BuflSige*i+j]＝UbSyo[j]；}}当文件小（20kb）时，它工作得很好。当主机读取数据时，每一步EP6都变空。如果文件较大，为工艺设备，6不会空的时候，所有的数据是错误代码（总是CD）。我用cy3684_kit_15，希望有人帮我找出原因或提出建议。谢谢！ 以上来自于百度翻译 以下为原文Hi there, I am trying to transfer large files(larger than 1MB) with fx2lp.Actually, I just followed AN61345(Implementing an FX2LP™-FPGA Interface). It worked well on EZ-USB console, 512 bytes send to ep2, 512 bytes back to ep6. Then I made a app with VC6. Divide the large file to 512 bytes packets, and transfer them via Xferdata() fuction. The code is for(i=0;iBulkOutEndPt->XferData(u***_i,buf_size); if(USBDevice->BulkInEndPt) o_finish=USBDevice->BulkInEndPt->XferData(u***_o,buf_size); for(j=0;j
2019-04-22 15:39
大家好，感谢您的时间和帮助。我正在使用SPC560B-DIS开发板和spc5studio IDE。突然当我试图闪存开发板时，我在日志中遇到错误说：错误，Core :: PpcJtagTargIntf，连接到目标丢失了！ 我怀疑是松散的电缆是罪魁祸首，但是同样的电缆与其他EVM（评估板）完全一致。然后我也检查了板上的迷你u***电源/调试母端口连接器也很好。（没有看到它附带的任何物理损坏是下图）。我已经从UDE附加了我的板日志文件得到了板连接丢失错误。 #development-board＃spc5-studio＃spc560b-dis以上来自于谷歌翻译以下为原文 Hi All,Appreciate your time and help.i am using the SPC560B-DIS development board with the spc5studio IDE.all of a sudden when i tried to flash the development board i got an error in the log saying : Error, Core::PpcJtagTargIntf, Connection to target lost ! i suspected a loose cable to be the culprit but then the same cable works perfectly fine with the other EVM(evaluation board). Then i also checked the mini u*** power/debug female port connector on the board which is fine as well.(did not see any physical damage on it attached is the image below).i have attached my boards log file from the UDE when i got the board connection lost error. #development-board #spc5-studio #spc560b-dis
2019-01-28 10:36
