bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512
2022-01-05 06:48
在时钟初始化中有这么一个步骤In MAINPLLCTL1, write ENSAT = 1 (for optimal PLL operation)我在BOOTCFG中没有找到对应函数是不是COREPLL
2018-06-21 00:49
* 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytes
2022-01-10 06:31
of low-power leadership and expertise to provide maximum performance with optimal power efficiency.
2018-06-21 07:47
这个函数有个高级参数，里面的英文注解都有这样一段话：For optimal speed, the VIcoerces sizes that are less than 240
2019-05-17 16:37
）： 512 bytes / 512 bytes I/O size （minimum/optimal）： 512 bytes / 512 bytes Disk /dev/mmcblk0boot1： 4
2022-08-08 14:54
/magnitude measurements with B/A.The noise is much higher with lower input powers.Is there an optimal power that should be used at the two input ports?Thank
2019-07-08 17:23
setting for -23 dBc. What is the proper ET level, and if different from optimal, what are the caveats? Thanks
2018-12-25 16:19
that error :[Place 30-575] Sub-optimal placement for a clock-capable IO pin and MMCM pair. If this sub
2018-11-09 11:46
in bytes. For optimal FS size, use max size in 4K-512 bytes steps (e.g. 3584,7680,117760) 建议最大使用8k
2018-06-07 06:11
