motor and movement as a generator. Can I omit the MPPT resistors from my circuit and still use the IC
2019-01-28 17:13
have that information and/or know why STM chose to omit it from the datasheet?Thanks.
2018-09-10 17:19
我正在学习 cubeMX 生成的 makefile，但有些参数我无法理解。在称为“构建应用程序”的部分中，我看到：$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR)$(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(
2022-12-13 06:05
The problems obviously depend on SDK and FX3 silcon revisions. Can you today recommend to safely omit
2019-02-20 14:06
为什么要配置屏幕背光控制光亮度的接口呢？如何去配置屏幕背光控制光亮度的接口呢？
2022-03-10 08:03
如何对以太网PHY芯片的时钟进行配置？如何对以太网PHY芯片的gmac进行配置？如何对以太网PHY芯片的rmii pin脚进行配置？
2022-02-21 06:54
use only channel 0 and never have the signal disconnected, then can I effectively omit the TACQ from
2019-03-12 06:12
如何对RV***inux串口驱动进行调试？
2022-03-09 06:31
敬启者！有人可以帮助我解决我的问题：我的项目使用时钟资源非常紧张：16 BUGMUX12IBUFG1 MCB1 BUFPLL_MCB1个PLL_ADV1 DCM1个BUFGDS2 GTP_DUAL直到我添加MCB块与它的基础设施我能够实现设计但在MAP过程结束后出现错误 - 在我看来时钟区域分配有问题，但我没有看到问题，不幸的是我仍然不熟悉用户搭配S6系列。可能是您可以查看报告确定问题的根源。报告附件。先谢谢你！Top_10X1G_to_1X10G_map.map 59 KB以上来自于谷歌翻译以下为原文Dear Sirs!Can someone to help me with my problem:I have project with very tight usage of clock resources:16 BUGMUX12 IBUFG1 MCB1 BUFPLL_MCB1 PLL_ADV1 DCM1 BUFGDS2 GTP_DUAL Until I am add MCB block with it infrastructureI was able to implement design but after it MAP process end with error - it seems to me there is problem with Clock Region Assignmen but I don't see the problem, Unfortunatly I am still not familiar user with S6 series. May be You can look over the report identify source of the problem. Report is in attachment. Thank you in advance! Top_10X1G_to_1X10G_map.map 59 KB
2019-06-12 12:53
现在，在 Touch 4.15 中使用 Dynamic Graph Widget。我们只画了4条线，但是有时候画面不流畅，好像有什么地方被挡住了，按钮动作有延迟。最后我们发现渲染时间随着线条绘制的增加而变长。希望有一些帮助来提高性能。这是我们的尝试：canvas buffer ，我试过最大的像 750KB，它不会帮助。单片机时钟速率，提高速度确实有帮助。但由于电池原因，不能双帧缓冲区，看起来没有帮助
2023-01-04 08:39
