的：Motor1=Thr - out_roll - out_pitch - out_yaw；Motor2=Thr - out_roll + out_pitch + out_yaw；Motor3=Thr
2018-04-09 11:46
/1任务void motor1_task(void *pdata){ OS_CPU_SR cpu_sr=0; while(1){motor1=0;delay_us(10
2019-07-12 04:36
=20，所以我想两种写法的输出频率应该一样才对，怎么会相差这么多。14.3kHz才是我需要的频率，请高手帮助，谢谢了。晶振频率11.0592MHz.1 #include 23 ***it motor1
2012-09-28 10:04
= temp; if(Terminal >Floor) {Dir = 1;UP = 0;DOWN = 1;MOTOR0 = 0;MOTOR1 =
2016-05-16 23:46
#include sbit k1=P3^1; sbit k2=P3^0; sbit k3=P3^2; sbit k4=P3^3; sbit motor1=P1^
2023-10-19 07:54
***it motor1= P0^0;45 unsigned int count,b;6 main()7 {8b=20;9TMOD = 0x01;10TH0= 100;11TL0= 100;12TR0= 1
2012-09-28 08:54
unsigned int//串口定义直流马达***it motor1=P1^0; // IN1左齿轮***it motor2=P
2015-02-25 19:56
()/3);}void motor_out(uint32_t motor1, uint32_t motor2, uint32_t motor3, uint32_t
2019-07-22 04:00
char CYCLE;unsigned char DUTY;uchar table[5];uint wd,sd;/*void Delay(uint cnt){while(--cnt);} */void motor1(){if(DHT11[2]>=20&&DHT11[2]
2015-08-19 21:43
motor servo 5个引脚 跟motor encoder 5个引脚分别怎么接线
2016-05-12 19:09
