MPlab X v4.05XC8v1.45MCCv3.45.1PIC库v1.65.1LinuxMint18PIC16F18875在好奇HPC板上。我能够使代码工作，但是在每个主写命令之后，我必须手动
2020-04-02 10:51
当从Linux驱动程序的Linux Mint 19v2 Cinnamon（兼容模式）启动时，每个标题获得“[12.512042] i2c_designware i2c_designware.2：控制器超时”，目的是安装。目前运行最新的BIOS（v48）并禁用安全启动...不知道我在这里缺少什么。使用普通/非兼容模式选项时，获得永久闪烁的光标。附加兼容模式截图。IMG_20180816_234457.jpg 1.7 MB以上来自于谷歌翻译以下为原文Per title getting "[12.512042] i2c_designware i2c_designware.2: controller timed out" when booting from Linux Mint 19v2 Cinnamon (Compatibility Mode) from GRUB from flash drive with the intent of installing. Currently running the latest BIOS (v48) and have Secure Boot disabled...not sure what I'm missing here. Get an eternally blinking cursor when using the normal/non-compatibility mode option. Compatibility mode screenshot attached. IMG_20180816_234457.jpg 1.7 MB
2018-12-03 15:34
;}The compiler is XC8 v1.44, MPLAB X IDE 4.01. OS is LinuxMint 18.3, 64 bit Can you please tell what am I doing wrong? Thanks in advance!
2018-11-29 16:58
如果我试图在MCC MPLABX崩溃的设备资源框架中选择“文档”下列出的数据表，它的进程必须被终止。我在Linux Mint 17.3和Ubuntu 14.04上运行MPLABX/MCC。我看不到任何设置来选择默认浏览器或PDF查看器。我可以从MPLABX“仪表板”中查看数据表。还有其他人有这个问题吗？谢谢，布瑞恩
2019-10-24 13:08
我试图用连接到三星LE19R86BD的NUC7JYH（从Ambros作为组装单元购买），当我在另一台机器（VGA 1440x900 59.9Hz - 一个漂亮的机器）上使用它时，该电视非常适合用作显示器。标准模式）。当通过HDMI连接到NUC机器时，显示器从一开始就给出错误“不支持模式”，即甚至不显示NUC启动画面，更不用说启动期间或之后的任何后续显示输出。我的套件没有VGA输出，所以我只限于HDMI（但这应该没问题......比VGA好！甚至更好！）我已经详尽地了解了三星显示器本身的选项，没有任何区别。我认为在启动时所有机器都会以分辨率/模式提供闪屏和后续默认显示输出，这些输出非常容易被任何显示器处理。这里出了什么问题，我该如何解决？所有人都非常感谢。杰米以上来自于谷歌翻译以下为原文I've tried to run the NUC7JYH (bought as an assembled unit from Ambros) with a HDMI connection to a Samsung LE19R86BD, a TV that functions perfectly well as a monitor when I use it with another machine (VGA 1440x900 59.9Hz - a pretty standard mode). When connecting via HDMI to the NUC machine, the display gives an error "Mode not supported" right from the outset, i.e. doesn't even display the NUC splash screen, let alone any subsequent display output during or after boot. The kit I have has no VGA output, so I'm confined to HDMI (but that should be fine ... better, even, than VGA!) I've been exhaustively through the options on the Samsung display itself, and none makes any difference.I thought that at startup all machines give their splash screens and subsequent default display outputs at resolutions / modes that are very easy for any display to handle. What is going wrong here, and how do I fix it?All help much appreciated.Jamie
2018-10-17 11:59
请问一下如何去安装并编译RTEMS脚本呢？其代码程序是怎样的？
2021-11-04 06:17
怎样去安装RTEMS脚本呢？其代码程序该如何去实现呢？
2021-11-05 08:03
怎样去安装RTEMS脚本呢？有哪些安装步骤呢？
2021-11-04 07:26
