beginning the transmision and to use the last interupt of TXIF for set the RCIE to 1.but it still one
2019-03-21 12:26
for both edges,I found that it need takeabout 14us. I want to know how to decrease interupt time Last , I
2019-04-10 07:36
文件n++;}}interupt(){if(...)n++;goto loop;}n为mp3文件的序号文件在被读取的时候 是连续的，也就是这个程序会执行很久就是想在按键按下后 就在中断里把n加一然后
2014-06-20 17:25
==50){ i=0; P1=led_du[j]; j++; if(j==16) j=0;}}}void timer0 () interupt 1{TH0=(65536-60000)/256;TL0
2014-12-08 22:00
*/IFS0bits.U1TXIF = 0; //clear the tx interupt flagIEC0bits.U1TXIE = 0; //enable transmit interuptsIFS0bits.U1RXIF
2019-03-27 09:22
ADD1MOV A,R7XRL A,#00HJNZ END_INTERUPTMOV R0,#32HCALL CLEAREND_INTERUPT:POP ACCPOP PSWRETIADD1:MOV A
2016-06-29 14:41
testing time so I can keep my 24 hr accuracy. And if so will this interupt the operation of the ohmf.
2019-06-03 15:24
for the reflected signal to occur. I've thought about using an interupt and then reading the PWM value
2019-03-21 09:54
says 'all IOs mappable to interupt vectors' and the pin description has a check for ext. Interrupt.But
2018-09-14 10:04
请教：MPU6050测得的角速度如何得到角加速度？
2017-10-17 15:39
