= json(ret,\\\"main.pressure\\\") let humid = json(ret,\\\"main.humidity\\\"
2023-05-10 11:51
, humid_1, humid_2, humid_3) VALUES (%d,%d,%d,%d)\"; 字符查询[128]； IP 地址 server_addr(192,168,8,108
2023-06-05 07:45
} #humid＃hts221 #humidity #sensor以上来自于谷歌翻译以下为原文 Hello. I have a problem with humidity measurement. Despite
2019-05-28 14:41
to test wifi float humid = 6; //faking sensor data to test wifi startThingSpeakCmd(); // preparacao da
2023-05-04 08:36
/b/humid"// I2C & DHTuint32_t start;uint32_t stop;// Initialize DHT sensorSHT31 sht;// pin
2023-02-21 08:23
twitter(" ENTER TWITTER TOKEN HERE ");在推文上发传感器监测到的值：humidity();float humid;//Twitter
2015-10-29 14:17
HDC1080 温度/湿度传感器并打印出大量数据。我有一个 LED 在湿度 >= 50 或温度 >= 30 时触发；（摄氏度）效果很好。 然后我为 Humid >
2023-06-09 07:20
如何实现基于单片机四路继电器温湿度控制？
2022-01-19 06:40
如何在两个Arduino之间发送无线数据而无需使用wifi或蓝牙呢？如何在Arduino上使用433MHz发送和接收模块？
2021-12-17 07:29
去年冬天我用了一个皮卡。现在我再次尝试，2天不会合作。我什么也没能编程。即使没有外部电源，也会遇到各种错误，比如AS1。没有足够的功率（它说小于4.75伏，我测量的最低值是4.82和最大5.08V）2。有时是说来自USB连接的不可供电的3.有时在编程时它不能连接到PICTIT3。有时它不能识别PIC（我现在有3个测试）5。MPLAB并不总是在我的配置下列出皮卡，但是它会尝试连接到它。其他的……用LED测试PCBs在调试模式下运行，并且从PicKit获得足够的电源来工作。去年冬天，随着时间的推移，它变得越来越差，并且连接器上出现了焊料问题（I）。有一个电线从皮卡到项目，以节省皮卡的连接器，对我来说是有点不对的PicKit。还有人有这样的问题吗？我想知道在花45欧元买一辆新车之前 以上来自于百度翻译 以下为原文 Hi I have a PicKit3 I used last winter. Now I am trying again, and for 2 days it will not cooperate. I have not been able to programme anything. Not even with external power I get all kind of errors, such as1. not enough power (it say less than 4.75V, the lowest I measured was 4.82 and max 5.08V)2. sometimes is says not enought power from USB connection3. sometimes it just cannot connect to the PicKit3 when programming4. sometimes it cannot identify the PIC (I have 3 to test at the moment)5. MPlab does not always list the PicKit under my configuration, but it will try to connect to it.and others... Test PCBs with LEDs runs on the debug mode, and gets enough power from PicKit to work well. Last winter it became gradually worse over time, and there was a solder problem on the connector (I have a wire from the PicKit to the item-to-programm in order to save the PicKit's connector) To me is sound that there is something wrong with the PicKit. Does anybody else have problems like this?I want to know a bit before spending 45 EUR on a new one
2019-05-07 07:20
