可执行文件（即无需安装）。动机这是关于 NodeMCU 社区过去多次触及的问题，最近一次触及https://github.com/nodemcu/nodemcu-firm ... -247884981。我
2023-05-04 06:10
添加到 nodemcu-firmware 中吗？ 这里有信息https://github.com/nodemcu/nodemcu-firm ... aC-module和这里https
2023-04-27 08:55
:AUTO-SW-PACKAGE-MANAGER 下载了 LLCE 1.0.4是否正确？ 将firm信息设置到/conf/local.conf后，只编译内核，还是完整编译yocto工程？ 我是否需要设置
2023-05-19 06:59
你好！有没有人建议程序员在电路中使用S6J300？ 以上来自于百度翻译 以下为原文Hi ! Can some body recommend programmer to work with S6J3001 in circuit ?
2018-09-03 16:24
亲爱的先生，我正在使用synplify D-2010.03，ISE 13.1（lin 64）和Spartan 6 XC6SLX150 FGG676为我在SDI的项目进行FPGA测试应用。我正在使用的流程是合成verilog代码，其中包含从coregen生成的一些DCM一个约束文件，top.sdc，在Synplify上，到geta网表。然后我使用输出网表文件.edf和.ucf文件来生成ISE的编程文件或仿真模型。我在FPGA板上看到的测试结果似乎与后标准不同模拟。为什么？约束是否与电路板条件不匹配？或者，导致不匹配的任何其他原因？谢谢。另一个问题是如何在我正在运行的情况下保持设计层次结构？在UCF中KEEP_HIERARCHY？它似乎不起作用。谢谢。彼得昌以上来自于谷歌翻译以下为原文Dear Sir, I'm using synplify D-2010.03, ISE 13.1(lin 64) and Spartan 6 XC6SLX150 FGG676 to do a FPGA test for my project in SDIapplication.The flow I'm using is synthesize the verilog codes which contains some DCM generated from coregen, witha constraint file, top.sdc, on the Synplify, to get a netlist.And then I use the output netlist file, .edf, with a .ucf file to generatea programing file or simulation model by ISE.The test result I saw on the FPGA board seems different from the post-parsimulation.Why?Does the constraints not match the board condition?Or, any other reasons to cause the mismatch?Thanks.Another question is about how to keep the design hierarchy in the case I'm running?KEEP_HIERARCHY in UCF?It seems doen't work.Thanks. Peter Chang
2019-07-24 08:23
来自于谷歌翻译以下为原文 I'm wary about assuming anything that doesn't have a firm specification and the V_EH
2019-07-29 14:16
电子邮件中这些问题的答案的文件推荐它的安捷伦公司的版本（pdf等）。非常感谢。编辑：jselmir于2014年4月9日上午3:12 以上来自于谷歌翻译 以下为原文Hello, Our firm has
2019-02-14 16:47
大家好，我希望MPLAB X IDE是一个MSI安装程序包，而不是*.exe包。有人知道是否存在或如何将*.exe转换为MSI？提前感谢！ 以上来自于百度翻译 以下为原文 Hello everyone, I am looking for MPLAB X IDE as an MSI installer package rather than an *.exe package.Does anyone know if one exists or how to convert the *.exe to MSI? Thanks in advance!
2019-05-20 14:09
平台。以上来自于谷歌翻译以下为原文I'm the lead technical resource for an AEC firm who is looking to find a solution
2018-10-09 15:20
大家好，我是阿什法克。我想问，这里是否有人知道这个MCU S6J300 1LSJ的任何合适的程序员。我希望能够在这个MCU上执行读写功能。我试着在论坛里搜索这个话题，但是没有任何有用的东西…为什么还有32和33甚至31的其他系列，但是没有1001LSJ？我试着在许多程序员的支持列表中搜索，很多人有这个Traveo系列，但不是一个特定的MCU从30S系列开始。任何帮助将非常感激。我希望有一个至少可以告诉我正确的方向谢谢您！以上来自于百度翻译 以下为原文Hi every one .I am Ashfaq. I want to ask if anyone here knows any suitable programmers for this certain mcu S6J3001LSJ. I want to be able to perform read and write functions on this mcu. I tried searching for this topic in forum but couldnt getany thing useful ...Also why is that there are all other series of 32 and 33 and even 31 but there is no 3001LSJ? I tried searching in support list of many programmers and many had this traveo family series but just not this one certain mcu starting with 30s series .any help would be really appreciated. I hope some one can atleast point me to the right direction thank you!
2018-08-27 14:06
