`驱动器用的是infineon的1EDI2002AS+1EBN1001AE，驱动部分原理图如下：测试方法如下：本来想做去饱和测试，但接上300V，一导通IGBT就烧了(脉冲12us内，IGBT要求
2019-07-04 21:27
参考安捷伦WaveformDownloadAssistant的这个网页.....我不喜欢使用Agilent.http：//www.home.agilent.com/agilent/edi
2019-07-29 14:08
以GPS技术结合GPRS技术实现可视化医疗废物运输管理和实时定位为基础的高速、高效的信息网络平台和EDI等为骨干技术的医疗废物RFID监控系统，将为环保部门实现医疗废物处理过程的全程监管提供了基础的信息支持和保障。
2019-08-02 06:56
：192.168.1.11租借给edi_fujitsu”输出到串行端口，然后，再次输出相同的字符串：）并且在telnet客户端连接之后，说*OPEN*。到目前为止还不错，但是当一个2'nd WiFi
2019-10-24 15:57
因此，我的“新人”炸了两个旧的功率传感器...公司购买了Agilent N8481A Pwr传感器（1200美元ea），这应该与我们的功率计E4418B配合使用。我需要将我的固件更新到最新版本才能使用它们，已经升级了DSP板（523美元），所以这就是问题 - 即使E4418B有一个RS-232（我们根本不使用GPIB）连接器背部;没有菜单选择可以通过GPIB选择它，即使手册说有。我不想在GPIB PCI板和电缆上花费更多，只是为了简单的固件更新。安装的固件是A1.03.00，我需要最新的A1.09.01手册说菜单=系统/输入 - >远程接口 - >选择接口，应该让我在HPIB或Serial之间进行选择。我的E4418B而不是显示远程接口显示HPIB。任何想法或帮助将不胜感激 以上来自于谷歌翻译 以下为原文So my "new guys" fried two of my old power sensors... Company purchased Agilent N8481A Pwr Sensors($1200 ea), which should work with our power meter E4418B. I need to update my firmware to latest version for them to work, already upgraded the DSP board ($523), so here is the problem- Even though the E4418B has an RS-232 (we don't use GPIB at all) connector on back; there is no menu selection to choose it over GPIB, even though the manual says there is. I don't want to spend more on a GPIB PCI board and cable just for a simple firmware update. Firmware installed is A1.03.00 and I need the latest one A1.09.01The manual says under menus = System/Input -> Remote Interface -> Select Interface, should let me choose between HPIB or Serial. My E4418B instead of displaying Remote Interface shows HPIB. Any ideas or help would be appreciated
2019-07-10 14:52
您好，我找不到LCR-meter的论坛，所以我只是把我的帖子放在这里。我有一个Escort ELC-3131D LCR仪表，即使在更换保险丝后，它仍然显示“FUSE”，适用于127 V：125mA和220 V：63 mA。有谁知道问题是什么？提前致谢。 以上来自于谷歌翻译 以下为原文Hi there, I couldn't find a forum for LCR-meters, so I just put my post here. I have an Escort ELC-3131D LCR-meter and it keeps displaying "FUSE", even after I replace the fuse, either for 127 V: 125mA and for 220 V: 63 mA. Does anyone have an idea what the problem is? Thanks in advance.
2019-06-04 14:02
*）SRAMYADDRYSCS0；//在EDI* BuffyHead＝0xAABB中启动RAM；这工作正常。我预期链接文件BTLY.MZ.LD存在问题，我已经更名为BTLYMX.LNK，并附在这里。我已经看过了，但是我
2020-05-12 08:57
IDA PRO是什么？IDA PRO提供几种的打开方式啊？如何去使用IDA PRO呢？
2021-10-14 09:29
汇编常用的指令有哪些？
2021-10-15 07:28
嗨，我正在尝试使用Signal Studio进行脉冲构建，以连接到N8241A宽带Arb和E8267D矢量信号发生器。使用系统配置向导，我可以连接到E8267D ok了，但是当我尝试连接到N8241A，它使用命令“TCPIP0 :: 192.168.1.101 :: 4000 :: SOCKET”，这将失败。当我使用Agilent Connection Expert时，我可以很好地连接到N8241A，因为它使用命令“TCPIP0 :: 192.168.1.101 :: inst0 :: INSTR”。在系统CONFIGRATION向导，我试图选择“从IO库配置的接口列表中选择一个外部宽带任意波”，我可以看到选择“TCPIP0 :: 192.168.1.101 :: inst0 :: INSTR”，但脉冲大厦去前进并发出命令“TCPIP0 :: 192.168.1.101 :: 4000 :: SOCKET”无论如何。我正在使用Pulse Building版本1.2.28（我也尝试过1.3.25）和Agilent IO Libraries版本15.0。我试过没有运气就卸载并重新安装所有相关的软件。奇怪的是，这个相同的配置适用于另外两台笔记本电脑。在这种情况下，该软件几年前就安装了。我不明白是什么迫使Pulse Building发出“SOCKET”命令，或者我如何改变它。任何帮助都表示赞赏。谢谢，迈克 以上来自于谷歌翻译 以下为原文Hi,I am trying to use Signal Studio for Pulse Building to connect to the N8241A Wideband Arb and E8267D Vector Signal Generator.Using the System Configuration Wizard, I can connect to the E8267D ok, but when I try to connect to the N8241A, it uses the command "TCPIP0::192.168.1.101::4000::SOCKET", which fails.When I use the Agilent Connection Expert, I can connect to the N8241A just fine, because it uses the command "TCPIP0::192.168.1.101::inst0::INSTR".In the System Configration Wizard, I tried to select "Choose an External Wideband Arb from list of configured interfaces in IO libraries", I can see the selection "TCPIP0::192.168.1.101::inst0::INSTR", but Pulse Building goes ahead and issues the command "TCPIP0::192.168.1.101::4000::SOCKET" anyway.I am using Pulse Building version 1.2.28 (I have also tried 1.3.25), and Agilent IO Libraries version 15.0.I have tried uninstalling and reinstalling all relevant software without luck.The strange thing is that this same configuration works on two other laptops.In this case, the software was installed several years ago.I don't understand what is forcing Pulse Building to issue the "SOCKET" command, or how I can change it.Any assistance appreciated.Thanks,Mike
2019-08-02 14:17
