嗨，我已经在ISE 14.7中的芯片内窥镜IBERT核心上生成了以太网10G BASE-R核心，我能够成功运行眼睛扫描测试。在IBERT GUI中，如果我将DWELL BER设置为1e-5是什么意思？以及如何转换为ES_PRESCALE值？谢谢钱德拉
2020-08-17 09:13
如何验证英国比克科技（Pico Technology）射频信号合成器AS 108或其它射频信号合成器的停延时间（dwelltime）设置参数？
2023-01-03 15:05
){GPIOB->PUPDR &= ~(3ARR = 0xFFFF;//250; // 最大计数TIM3->CCMR1 = 1; // 比较 1TIM3->DIER = (1SR &= ~1;}}Dwell不会前进，除非我把Dwell
2022-12-02 06:44
have it setup for it to dwell at each frequency for 5ms. When I look at the signal though the dwell
2019-07-02 07:51
and the third is the dwell time. I don't want to load a list from a file, but rather make a list
2019-03-14 10:14
:_ In the bar graph, how to set the dwell time to 1 or 2 seconds to measure quasi peak.
2019-08-09 14:19
for 10.5ms LIST:DWEL 10, 0.0105 LIST:STEP AUTOList to be paced by Dwell time TRIG:SOUR BUSGPIB
2019-05-20 14:16
error，天线功率密度Antenna power density，信道带宽Occupied bandwidth，驻留时间Dwell time等等。3、所有无线产品进入日本都是需要强制过这个认证的，需要
2019-08-13 09:47
是管控产品的射频部分，常见测试指标有：频率差错Frequency error，天线功率密度Antenna power density，信道带宽Occupied bandwidth，驻留时间Dwell
2019-08-13 09:59
replacement unit).Basically the setup is just the following commandsThe frequency, power, and dwell lists
2019-07-16 11:45
