`我是新手如图C107与Q100为何不能灌上铜啊给Q100灌铜时的提示Drilled pads withNondrilled pads withless than 50% thermal extensionsless than 50% thermal extensions`
2013-02-21 10:09
drilled holes in the target PCB, it is highly recommended to provide two such plated holes in order
2009-10-13 19:20
one.There is only one pre-drilled hole in the desktop housing to install a external antenna.So I would
2018-11-16 11:20
an hour of searching Google yielded nothing.I drilled down into the Program Files -> Cypress ->
2019-01-03 14:16
的过渡线，使焊盘与信号线连接更加牢固，过渡更加平滑。 2. Route模式下，激活命令，弹出对话框后，输入具体参数，如下图： 3. 分别在“Drilled component pad
2020-12-11 17:05
/blind via 35、 任意层内部导通孔：any layer inner via hole (alivh) 36、 全部钻孔：all drilled hole 37、 定位孔：toaling
2015-02-05 17:42
inner via hole (alivh)36、 全部钻孔：all drilled hole37、 定位孔：toaling hole38、 无连接盘孔：landless hole39、 中间孔
2009-03-25 15:08
：buried /blind via35、 任意层内部导通孔：any layer inner via hole (alivh)36、 全部钻孔：all drilled hole37、 定位孔：toaling
2009-06-19 21:27
