with a clock of 16MHz.In this I am planning to implement debounce period for switch. I have gone
2018-11-23 15:28
and set OT Debounce counter to clear immediately when threshold criteria
2023-03-30 07:48
//例化按键消抖模块key_debounce u_key_debounce( .sys_clk(sys_clk), .sys_rst_n(sys_rst_n), .key(key), .key_flag (key_flag), .key_value(key_val
2019-05-27 03:34
is function snippet. uint32 CapSense_CheckIsSensorActive(uint32 sensor){ uint8 widget; uint8 debounce
2018-10-29 11:36
边沿触发可以设定为上升或者下降 有这样一个函数GPIO_SET_DEBOUNCE_TIME，文档中说是设置“Set the interrupt de-bounce sampling cycle
2023-08-29 06:48
threshold = -84db 227FLeft AGC Noise detect debounce = 512ms, signal debounce = 32ms 1D8FRight AGC enable
2024-10-25 08:26
to deal with the debounce circuit limitations. */ignore_next_dio_int = 1;/* Invert toggle status
2020-09-15 21:29
。代码分析1_Verilog\3_top_key_beep 模块划分如下,由两个模块key_debounce和beep_control组成 Key_debounce模块实现消抖,在按键变化时开始
2023-02-08 22:43
模块，一个按键消抖模块和蜂鸣器控制面模块。按键消抖消抖，即消除抖动。若不消除抖动，则显得过于灵敏，在短时间内会多次反复触发。思路：每次按下给予20ms的延时，若这段时间内状态不变，则输出，否则重新计时。模块名：key_debounce.vmodule key_deboun
2022-01-18 08:28
);} edge_detected:/* Reset debounce_counter to debounce_max_count */move r3, debounce
2024-06-26 07:12
