consumes too much current. It doesn't have any load on it so it should take maximum of 100mA
2019-04-01 08:48
for the mutex. Essentially this program does nothing, works perfectly but consumes almost 100
2018-09-13 16:49
could be damaged by ESD. I changed it, but the new one consumes almost the same (12µA).I do not know
2019-05-14 10:16
of this solution is I'm continously polling the sensor and this consumes a lot of current. What I
2018-09-27 10:43
, however I notice that a simple application like blinking an LED consumes a fairly large percentage
2019-01-16 06:36
buffer data but it consumes exactly 100MB/s. The FPGA is capable of pulling data out of the FX3 when
2019-06-10 06:27
) Assuming each robot consumes at most 30 Watts, will there be a limit on the number of devices that can
2018-11-29 11:49
我想在我的设计中构建和插入Agilent Trace Core 2（ATC2），但我不确定它的大小和我需要多少设备资源？以上来自于谷歌翻译 以下为原文 I want to build and insert and Agilent Trace Core 2 (ATC2) into my design, but I am not sure about the its size and how many of my device resources does it take?
2018-08-29 16:45
PSOC5LP每秒可中断的最大次数是多少？我将有四个定时器，具有500个USEC、1MSEC、5MSEC和1秒的周期，每个时钟都连接到它们各自的ISR。在1MSEC中，我也有一个DMA触发3次。PSoC能处理这些中断量吗？如何粗略地计算可以成功处理的中断的最大数目？谢谢您。 以上来自于百度翻译 以下为原文What is the maximum number of interrupts per second aPSoC5lpcan process? I am going to have four timers with 500usec,1msec ,5msec and 1 sec period and each of them are connected to their respective ISR.I also have a DMA triggering 3 times in 1msec. Can PSoC handle these amount of interrupts? How Can i roughly calculate the max number of interrupts that can be processed successfully? Thank you.
2018-11-07 17:06
that consumes more time than 15 us and hence using if statements would not be helpful. Thanks
2019-07-29 15:29
