请问mateXT鸿蒙 4.2.0.130， 如何可以安装并正常使用goople play store？ microG service hw apk,microG companion hw.apk
2024-11-28 08:43
; Error happened in: do_cloog_get[scripts/build/companion_libs/130-cloog.sh@741] [ERROR] >&
2023-06-09 08:47
in the superspeed configuration device, all is OK.The burst size set in the endpoint companion is properly set
2018-12-21 15:22
来自于谷歌翻译 以下为原文Hi The 14585A companion software for the N6705B can extract data from the device quite
2018-12-18 16:13
你好，我的任务是得到一个USB 3的估计（和USB 2，但让我们暂时搁置）延迟。我的阅读表明，最好的潜伏期是用中断端点来实现的。但是在分布中没有中断实例（或者在任何分布中）？HTTP://www. CyPress？COM/？APP=论坛和ID；ID＝167和；RID＝55106）。那么，还有没有中断的例子，我可以很快得到一些延迟数字呢？或者你只是…有这样的数字吗？我说的是PC & GT；芯片和PC的等待时间。谢谢杰森 以上来自于百度翻译 以下为原文Hello, I've been tasked with getting an estimate for USB 3.0 (and USB 2.0, but lets set that aside for now) latency. My reading suggests that the best possible latency is acheived with interrupt endpoints... but there are no interrupt examples in the distribution (or in any distribution? http://www.cypress.com/?app=forum&id=167&rID=55106). So are there still no interrupt examples I can quickly get some latency figures for? Or do you just... have such figures lying around? I am speaking of PC->chip->PC latency. Thanks Jason
2019-07-03 10:05
我使用FPGA + FX3+ SLAVEFIFO测试传输数据到PC的速度。但是速度是6Mb/s，所以速度慢，固件使用SLaveFiFrimc。发生什么问题了吗？那么有没有解决办法呢？ 以上来自于百度翻译 以下为原文I use the fpga+fx3+slavefifo to test the speed of transfer data to PC. but the speed is 6MB/s,so slow,the firmware is use the SlaveFifoSync. Any problem happened? so there is any solutions to fixed it?
2019-04-24 10:48
你好，我已经下载了AN779示例，它是一个UVC示例，用于在USB上传输相机帧。工作很好。这个扩展是通过大量端点在高速和超高速中传输数据。有没有流过等时端点的例子？谢谢，苏巴拉岛 以上来自于百度翻译 以下为原文Hi, I have downloaded AN75779 example, which is a UVC example to stream the camera frames over USB. It is working fine. This exmaple is streaming the data through Bulk endpoints in both high speed and super speed. Is there any example to stream through Isochronous endpoints? Thanks, Subbarao.
2019-05-08 15:40
有人能告诉我该怎么办吗？该固件的SDK我应该使用测试是否我的板可以工作在3的速度或不，我能在控制中心设备描述符信息中看到吗？谢谢，绒布 以上来自于百度翻译 以下为原文can somebody tell me what to do?which firmware in the sdk should i use to test whether my board can working on3.0 speed or not, can i see it in the control centre device descriptor info? thanks, lint
2019-04-22 11:04
="7"Interval="4"Type="SUPERSPEED_USB_ENDPOINT_COMPANION"MaxBurst="
2018-09-19 11:04
任何电路的设计可定离不开电源，在模拟电路的设计中对电源尤为敏感。个人在工作中，公司的产品设备常常碰到50Hz的电源工频干扰问题，一直没有一个很好的方法能够对电源上引入的50Hz的工频干扰信号有个有效地抑制，不知道这里的诸位工程师们 有没有好的建议、方法能够探讨探讨。
2018-08-15 06:35
