modelsim.ini文件，添加convert_hex2ver.dll。出现如下问题：# ** Note: (vsim-3812) Design is being optimized...# # ** Note
2016-01-14 10:52
Error during: Register, Execution,It appears that the target is being held in reset.This may be due
2020-06-17 12:16
on each node to go into transmit mode automatically when data is being transmitted from a local
2018-12-24 15:52
This application note shows how the 34980A multi-function switch/measure unit is being used to test medical alert devices.
2018-09-30 10:28
passing to an initializer function is not being passed correctly. Below is an example of the code I'm
2018-08-24 15:50
This document provides instructions for proper installation and operation of the N6700 MPS when being powered from 400 Hz ac input.
2019-09-05 06:44
through a GPIB - USB cable. The data being displayed on the Data Acquisition System screen
2019-02-20 06:52
...The process cannot access the file because it is being used by another process."**** OpenOCD failed
2018-09-26 16:40
An ideal probe would provide an exact replica of a signal being probed. However, the probe becomes
2018-10-16 10:22
or USART may be being used or maybe they are not being used. Whatever the state of USB or USART, it should
2019-01-24 12:36
