• 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
返回

电子发烧友 电子发烧友

  • 全文搜索
    • 全文搜索
    • 标题搜索
  • 全部时间
    • 全部时间
    • 1小时内
    • 1天内
    • 1周内
    • 1个月内
  • 默认排序
    • 默认排序
    • 按时间排序
  • 全部板块
    • 全部板块
大家还在搜
  • 5055A数字记录仪操作和维修手册

    05055-90010 (September 1973) The 5055A Digital Recorder is a discontinued product. This manual is provided for information only.

    2018-11-06 16:31

  • ADS1278的评估板为什么老出错?是什么原因导致的?

    ADS1278的评估板为什么老出错,主要是error code 6004和5055,几乎运行一两次就不行了,尤其是大的采集数据量时,很少几次能通过。到底什么问题?用的是ADCpro2.01版。还有,一错就要从头来,没有错误处理。TI的软件怎么这么差?从来没见过这样的东西还能拿出来?

    2025-02-10 06:17

  • 请问PIC24FJ128GC010与AMS AS5055A磁力旋转编码器怎么进行SPI通信

    我一直在尝试各种各样的事情来完成这项工作,但我什么也没找到。我试过CKE、CKP、SMP、主预分频器和次预分频器的所有可能的组合(字面意思:我编写代码来迭代所有可能的组合,重置编码器,并尝试从中读取一些值并通过USB CDC将它们吐出)。我试过使用循环,我试过使用中断。我已经尝试过3线只读和4线双向。我已经尝试了16位模式和8位模式。我已经尝试过声明SS,我已经尝试让SPI模块来处理它。我尝试使用“框架模式”,我试着把它关闭。在每一种情况下,我从编码器接收空值。不幸的是,我没有访问作用域的权限,但是我已经按照PIC24和编码器的数据表中的说明操作,并且尝试了来自整个网络的代码。这似乎不那么困难,但什么也不能奏效。我想在这里发布一些代码,但是我已经尝试了很多不同的变体,以至于我无法选择在这里发布的代表我努力的东西。谁能告诉我正确的方向吗?我有什么遗漏在这里吗?这看起来应该非常简单。 以上来自于百度翻译 以下为原文 I've been trying various things to get this working and I'm just not getting anywhere. I've tried every possible combination of CKE, CKP, SMP, primary prescaler, and secondary prescalar (literally: I wrote code to iterate through all possible combinations, reset the encoder, and try to read a few values from it and spit them out via USB CDC). I've tried using loops and I've tried using interrupts. I've tried 3-wire read only and 4-wire bidirectional. I've tried 16-bit mode and 8-bit mode. I've tried asserting SS myself and I've tried letting the SPI module take care of it. I've tried using "framed mode" and I've tried leaving it off. In every case, I receive empty values back from the encoder. Unfortunately, I don't have access to a scope but I've followed the instructions in the datasheets for the PIC24 and the encoder as well as trying code from all over the web. This doesn't seem like it should be that difficult but nothing works. I'd post some code here but I've tried so many different variations on it that I couldn't possibly pick something to post here that would be representative of my efforts. Could anyone point me in the right direction? Is there something I'm missing here? This seems like it should be very straightforward.

    2019-07-30 10:20

  • 德国智能锁专家——凯迪仕指纹密码锁,让回家从此简单

    是:5088,5025,5055,5155.本品为凯迪仕雅黑系列之5155:一、开锁方式: 密码 指纹 钥匙二、产品特点:1.采用瑞典FPC公司银行专用指纹传感器,安全无可比拟;2.高强度钻化触摸感应屏,永不

    2013-06-26 11:02

  • 基于PXI仪器的IC直流特性测试

    Unit, Parametric Measurement Unit, GX5295, GX5055, GX5960, I-V, V-IPMU,SMU,参数,测量,源测量单元,参数测量单元,GX5295

    2017-04-13 15:50

  • 电子锁语音解决方案列举

    串口、按键控制三种模式,支持BUSY状态输出。时间长度为:WTN5055(55秒)、WTN5085(85秒) 单片机跟语音芯片的工作电压均为5V,PWM输出,一线串口(如下图) B.T588D分有两种

    2016-01-28 18:53

  • 怎样使用16位FMC外设写入LCD控制器的单个寄存器呢

    *)0x60000000) = (uint16_t)0x5555;??_writeReg_0:0x2401'310c: 0xf245 0x5055MOVWR0, #21845

    2022-12-21 06:11

  • 中国电磁兼容认证标准目录

    JG5055-1994履带起重机安全规程 5 8427 叉车:其他装有升降或搬运装置的工作车 GB IO827-1989机动工业车辆安全规范(适用于叉车)JT5026-1989 港口牵引车技术条件 6

    2009-10-09 08:57