DECT telephone RX TX gians 怎么调制！
2012-05-20 13:58
is to record the analog speech or audio from a telephone in PCM G.711 encoded format. Here the sampling
2019-04-02 12:06
）和USB电话模型（USB Telephone Model），如图1所示。本文所讨论的虚拟串口就属于USB传统纯电话业务模型下的抽象控制模型。 通常一个CDC类又由两个接口子类组成通信接口类
2023-06-15 07:02
利用stm32与AD7768通信读取电压，用SPI还是引脚控制模式好点！有这样用过的吗
2018-08-06 07:35
你好，我有一个三星np-n150-haz1it我发现英特尔凌动N450受到幽灵的影响。怎么解决？最好的祝福以上来自于谷歌翻译以下为原文Hello,I have a samsung np-n150-haz1itI found Intel Atom N450 is affected by Spectre.How to solve?Best Regards
2018-10-26 14:49
你好，我在Linux下使用HDMI音频，但音频音调低，似乎采样率低。安装以下BIOS， 版本：RYBDWi35.86A.0371.2018.0709.1155发布日期：07/09/2018安装的内核是，#uname -r65年4月14日，巴布亚alsa-info.sh输出位于https://paste.pound-python.org/show/SyQYxjeTdNWsyh4GllJW/知道如何修复音频吗？谢谢以上来自于谷歌翻译以下为原文Hello, I have HDMI audio working under linux but the audio has a low pitch and it seems to have a low sample rate. The following BIOS is installed, Version: RYBDWi35.86A.0371.2018.0709.1155 Release Date: 07/09/2018 The kernel installed is,# uname -r4.14.65-gentoo The alsa-info.sh output is at https://paste.pound-python.org/show/SyQYxjeTdNWsyh4GllJW/ Any idea how to fix the audio? Thanks
2018-10-17 11:55
分享一个不错的RJ11电话线的浪涌防护解决方案
2022-01-14 06:10
你好我有一个入门级存储系统SS4000-E。多年来工作非常好，我必须恢复错误删除的文件夹。我试图将硬盘一个接一个地直接连接到我的电脑上然后尝试，但是所有的文件都是成千上万的文件（大部分都是不可读的），但没有文件夹结构等。请指教和帮助。FTLaif以上来自于谷歌翻译以下为原文Hi I have a Entry Storage System SS4000-E. Working very fine since many years, I have to recover a folder which was deleted by mistake. I have tried to connect the hardrives one by one directly to my PC and try, But all a get is several thousands of files (most of them unreadable), But no folder structure etc. Please advise and help. FTLaif
2018-11-09 11:27
只有1个通道，只有1个迹线。显示的标记值为：0.000 s -995.67 mOhm 194.70欧姆2.4059 uH我可以读取0.0000 s，其中：CALC1：MARK1：X？查询，我可以读取下两个电阻值：CALC1：MARK1：Y？查询但我无法弄清楚用于读取电感的查询。帮助赞赏。 以上来自于谷歌翻译 以下为原文Have only 1 channel and only 1 trace. The marker displayed has value:0.000 s-995.67 mOhm 194.70 Ohm 2.4059 uH I can read the 0.0000 s with the :CALC1:MARK1:X?query and I can read the next two resistance values with the :CALC1:MARK1:Y? query But I cannot figure out which query to use to read the inductance. Help appreciated.
2018-11-21 10:57
我正在使用WD Black NVMe 256G SSD与PCIe到NVMe适配器连接，系统作为Windows 10版本的最新版本。但开始格式化时不吉利，直到100％（低格式或快速带有NVME问题的工作站主板W2600CR格式）显示错误且无法竞争。之后，驱动器显示分区格式为RAW。BIOS版本是最新版本R02.06.E006_rev2以上来自于谷歌翻译以下为原文I am using the WD Black NVMe 256G SSD with PCIe to NVMe adapter connected, system as windows 10 version up-to-date. But unlucky when start to format until 100% (low or quick format) show error and cannot competed. after that the drive show partition format is RAW. the BIOS version is up-to-date version R02.06.E006_rev2
2018-11-20 11:23
