想请教下body mount and magnet mount antenna怎么翻译
2016-07-07 13:08
of magnet position. I got this value before the magnet was placed anywhere near the IC.I’ve moved
2018-10-22 14:28
) which will be located on the bottom of the canister and flowing on the surface neodymium magnet
2018-10-22 16:28
for mounting. Would a strong neodymium magnet near the back or bottom of the camera have any affect on it's function? thanks,Dan
2018-10-11 16:59
设备、电子产品等行业以及科研教育等领域提供复杂的磁场、电场、热场问题解决方案。 INFOLYTICA产品系列主要包含MagNet, ElecNet, ThermNet, OptiNet
2019-06-27 06:10
and 8. In particular by using an external magnet I can not get any saturation of the device
2018-10-25 10:55
want to use to measure the winding resistance of a permanent magnet generator.I've already checked
2019-05-28 11:46
数据手册的第6.2节说''SPC，SDI，SDO是常见的''但是有2个不同的SDO引脚，SDO_A和SDO_G。有没有人尝试连接目标板上的两个SDO引脚？ 当CSx引脚为HI时，有没有人知道I2C模式是否始终有效？如果是这样，您如何防止I2C模块错误地从可能在SPI总线上运行的其他设备接收命令？ 谢谢以上来自于谷歌翻译以下为原文 Section 6.2 of the data sheet says that ''SPC,SDI,SDO are common'' however there are 2 different SDO pins, SDO_A and SDO_G. Has anyone tried connecting the two SDO pins on the target board? Does anyone know if I2C mode always active when the CSx pin is HI? If so how do you prevent the I2C module for erroneously receiving a command from other devices that may be operating on the SPI bus? Thanks
2018-11-28 10:36
最好基础一些的书，谢谢。
2018-09-01 13:56
问候我正在使用LIS2MDL为教育市场构建磁场传感器。当测量的磁场超过最大允许值时，我注意到LIS2MDL返回不可预测的数据而不是0x7fff（32767）或0x8000（-32768）。有没有办法可以检测磁场测量溢出，以便我们的可视化软件可以让用户知道测量数据无效？谢谢Scott Wild以上来自于谷歌翻译以下为原文 GreetingsI am using the LIS2MDL to build a magnetic field sensor for the education market.When the magnetic field being measured exceeds the maximum allowed value, I notice that the LIS2MDL returns unpredictable data rather than 0x7fff (32767) or 0x8000 (-32768).Is there a way I can detect a magnetic field measurement overflow so that our visualization software can let the user know the measurement data is invalid?Thank youScott Wild
2018-09-25 17:16
