,Is the BenchVue availabe for E4980AL LCR meter? I installed BenchVue. It can see my E4980AL meter, but show "unsupport". Thx, Jacob
2018-09-26 15:15
，Jacob [mailto：Jacob.Meachen@adckrone.com]发送时间：2008年9月24日星期三8:01 PMTo：VRFS主题：[vrf]禁用excelHi VRF中图表
2019-08-12 13:39
in the field (whithout iMPACT) just the built in MicroBlaze. Thanks,Jacob
2019-06-03 09:13
by the oscilloscope. Anybody having a example on how to send the parameters? Kind regads, Jacob
2019-05-07 07:39
and 0x0f80). - What is this data?- Where does it come from?- How can I flash it using J-Link? Thanks, Jacob
2018-09-11 14:49
| Does anyone know what causes this and is there any solution/workaround? Br. Jacob
2018-11-12 14:36
Is this possible during runtime? We need to be able to turn an input pin to an output pin, and vice versa. Thanks, Jacob
2018-12-06 15:09
and polling RDSR1? SPI frequency is 2.5MHz, both mode 0 and mode 3 act the same. Flash is factory default settings afaik. Thanks,Jacob
2018-09-26 17:16
Jacob Meachen ---您目前订阅了vrf：ming_meng@agilent.com要订阅，请发送电子邮件至：“vrf-request@lists.it.agilent.com”，邮件正文
2019-08-13 09:49
你好，主机发送给CYW20706／07的每个命令从0x19开始。有一个函数“UIT32”，HCIA控件，PROCEXRXYCMD（UTI8T*T*PYDATA，UTIT32×T长度）来处理通过UART接收的各种命令。我想知道代码中的CYW20706／07确保第一个字节是0x19。请给我指出适当的代码。谢谢您，普拉文库马 以上来自于百度翻译 以下为原文Hi, Every command a host sends to CYW20706 / 07 starts with 0x19. There is a function "uint32_t hci_control_proc_rx_cmd( uint8_t *p_data, uint32_t length )" to handle various commands received over UART. I would like to know where in the code the CYW20706 / 07 makes sure that the first byte is 0x19. Please point me to the appropriate code. Thank you,Pravinkumar
2018-11-15 14:16
