******************************************************************/1. HaawkingIDE新建工程2. 初始化GPIOvoid GPIO_INIT(){EALLOW;GpioCtrlRegs.GPADIR.bit.GPIO6 = 1
2021-07-24 15:36
******************************************************************/1. HaawkingIDE新建工程2. 配置GPIOvoid GPIO_INIT(){EALLOW;GpioCtrlRegs.GPADIR.bit.GPIO0 = 1
2021-07-31 16:47
) { EALLOW; GpioCtrlRegs.GPAMUX1.bit.GPIO3 = 0; GpioCtrlRegs.GPADIR.bit.GPIO3 = 0
2023-08-04 18:10
;//D400MUX = 0;GpioCtrlRegs.GPADIR.bit.GPIO7= 1;//D400DIR = 1;GpioCtrlRegs.GPAMUX1.bit.GPIO6 = 0;//D401MUX
2021-05-28 20:52
;GpioCtrlRegs.GPAMUX1.bit.GPIO6 = 0;//设置GPIO6为普通IO模式GpioCtrlRegs.GPADIR.bit.GPIO6= 1;//设置GOIO6为输出模式
2021-07-24 15:30
