来自于百度翻译 以下为原文Hello everyone it is possible to create millisecond or microsecond delays like cy_delay
2018-11-06 14:17
;***it shu3=P3^6;***it shu4=P3^7;uchar code table[]={0x06,0x5b,0x4f,0x66};void delays(uint num){uint i,n
2016-12-14 20:49
用这个布线去，芯片是MPU6050三轴陀螺仪加速度计，很奇怪！#define delays delay_ms(2)//delays;//初始化IICvoid IIC_Init(void
2019-04-25 03:39
, regarding the Fast Continuous PC mode, which allows masking the Tasc and Tcsc delays, is there a way
2018-09-17 14:19
******************************************************/#includetypedef unsigned char uchar;typedef unsigned intuint;void Delays(void);void PutString
2015-07-18 16:09
the Fast Continuous PC mode, which allows masking the Tasc and Tcsc delays, is there a way to enable
2019-06-19 09:06
本人入门学徒一枚，最近刚刚接触单片机，写了一个小程序，是控制单个数码管显示的程序（程序如下），在单步运行时，每次运行到delays()时就陷入死循环，个人感觉程序没有问题，就是不知道到底问题出自哪里
2013-11-29 20:21
some propagation delays like: and #20 (out, in1, in2);(using #20 as 20 nanoseconds) and the simulation
2019-01-09 09:51
用STM8S单片机 ADC值变小到一定范围,使LED灯闪烁（不能用while+delays）LED的引脚(GPIOA, GPIO_PIN_3），求大神程序
2016-12-29 08:34
the ISE Timing Analyser is reporting delays of 2 nSec to 8 nSec which seem excessively large. Any
2019-07-30 09:14
