本帖最后由 Anncastle 于 2015-6-21 14:51 编辑 82xx.DLL failed to create DISM model for primitive type
2015-06-21 14:48
dism时遇到困难。请求你的帮助,我已经搜索社区的答案,但我看到该实用程序已被删除。任何人都可以给我一个链接和步骤来安装USB 3驱动程序。和正确的intel u*** 3驱动程序安装以上来自于谷歌翻译以下
2018-10-29 14:28
--------------------------------------------------------------------------------------------------------------------------------------------------------- dism
2023-05-17 07:42
--------------------------------------------------------------------------------------------------------------------------------------------------------- dism
2023-05-05 14:12
我有一台带有Intel S1200SPS服务器主板的新服务器。我在RAID 1虚拟磁盘上安装了Server 2016,它是在RAID BIOS(ESRT II)中使用双三星EVO 250GB SSD安装的。 RAID还配置了额外的RAID 1虚拟驱动器,包含2个2 TB的WD Gold驱动器,用于数据存储。它运行正常,直到我把它发送给我的客户。主板在运输中损坏,(不会启动POST)所以我用相同的型号替换它,我使用硬件诊断检查所有其他组件,包括三星SSD诊断和WD Lifeguard以确保没有其他任何损坏(正在一定不要影响驱动器上的数据)。诊断是在一个单独的系统上执行的,我可以单独读取驱动器,操作系统和文件都在那里。重新组装系统后,我重新配置BIOS以使用RAID for SATA,因为它是一个新的主板,重新设置RAID 1虚拟驱动器,并将SSD RAID对设置为ESRT II BIOS中的可启动。我对两个RAID虚拟驱动器进行了一致性检查,结果很好,修复了不一致性。然后我将BIOS设置为从RAID阵列启动。在这一点上,我认为它会像原来一样启动。但是,Windows无法识别RAID驱动器,因此无法启动。当我进入恢复模式命令提示符时,虚拟驱动器根本不可用(未在wmic logicaldisk列表中列出)。我希望你以前英特尔公司做过这类事情并且有一个技巧可以帮助我让Server 2016重新启动,而不必浪费时间安装和配置服务器和其他软件。有任何想法吗?以上来自于谷歌翻译以下为原文I have a new server with the Intel S1200SPS server mainboard.I installed Server 2016 on a RAID 1 virtual disk, which was setup in the RAID BIOS (ESRT II) with dual Samsung EVO 250GB SSD's.The RAID was also configured with an additional RAID 1 virtual drive of 2 2-TB WD Gold drives for data storage. It was working fine until I shipped it out to my client.The mainboard was damaged in shipping, (would not power up to POST) so I replaced it with the same exact model,I checked all other components using hardware diagnostics, including Samsung SSD diagnostics and WD Lifeguard to be sure nothing else was damaged (being sure not to affect data on the drives).The diagnostics was performed on a separate system, and I could read the drives individually, that the OS and files are there. After re-assembling the system, I reconfigured the BIOS to use RAID for SATA, and because it's a new mainboard, re-setup the RAID 1 virtual drives, and setting the SSD RAID pair as bootable in the ESRT II BIOS.I did a consistency check on both RAID virtual drives, which went well, fixing inconsistencies.I then set the BIOS to boot from the RAID Array.At this point, I figured it would boot up as originally.However, windows doesn't recognize the RAID drives, and so won't boot up.When I got into recovery mode command prompt, the virtual drives are not available at all (not listed in the wmic logicaldisk list). I'm hoping you Intel guys have done this type of thing before and have a trick up your sleeve to help me get Server 2016 to boot again and not have to lose the hours of time spent installing and configuring Server and other software.Any ideas?
2018-10-31 15:50
怎样在ROC-RK3568-PC设备上玩裸机开发呢?
2022-03-02 06:49