2546 standards• Dynamic properties characterization via continuous measurement of stiffness by indentation dept
2010-08-12 11:19
operating in Continuous Conduction Mode (CCM). The controller is suitable for systems in the 100 W to 2 kW range over a wide-range universal ac
2010-09-30 00:48
operating in Continuous Conduction Mode (CCM). The controller is suitable for systems in the 100 W to >2 kW range over a wide-range universal
2010-09-30 00:44
Introduction Nanoscale characterization of biological materials continues to be a challenge in the fi elds of mechanics and material testing. One example of this type of research is the characterization of the
2010-08-13 10:15
One of the main benefits from the 180° interleaving of phases is significant reductions in the high-frequencyripple components of both the input current and the current into the output capacitor of the PFC pre-regulator.Compared to that o
2009-11-20 14:27
There is an ever increasing trend towards putting entire systemson a single chip. This means that analog circuits will have tocoexist on the same substrate along with massive digital systems.Since technologies are optimized
2009-07-21 09:26
Features and Benefits• Enables mechanical properties to be determined continuously as specimen is strained• Seamless compatibility with Agilent T150 UTM• Allows complex moduli to be measured at
2010-08-13 09:38
2013-06-26 10:58
2015-01-13 15:24
AD9261: 16-Bit, 10 MHz Bandwidth, 30 MSPS to 160 MSPS Continuous Time Sigma-Delta ADC Preliminary Data Sheet
2021-01-28 15:30
