=P2^5;***it in3=P2^6;***it in4=P2^7;***it valve1=P3^4;***it valve2=P3^5;***it valve3=P3^6
2018-03-06 14:01
);f_valve=zeros(1,M);for i=0:K-1;for x1=0:K-1; even_no(i+1)=even_no(i+1)+(x(2*x1+1)*exp(-j*2*pi*x1*i
2014-07-29 12:46
TIM3中断回调函数是怎样用串口输出pwm频率的？怎样去测量pwm频率并在串口助手上显示呢？
2021-12-02 07:24
KeiL5 仿真时报错,只能从任务管理器关闭它, 重启
2024-04-07 06:44
线应该没有连错，但是编译的时候全是错误
2012-11-12 10:56
如何检测pwm的频率？
2022-02-14 06:51
the age of 21.3. If they have access, a valve is wired up to open the line on the keg.4. INSIDE
2019-06-13 12:06
/Makefile-default.mk磁盘/default/./Evo_Valve_Driver_Test_Fixt”。_-_PIC16F877a.X.生产.己制造[2]：输入目录“D:/f张
2019-10-31 13:08
我一直在PIC32 MZ数据表和FRM中主要读定时器/计数器，它似乎不能解码正交编码器信号，即使我在微电路外使用一些逻辑IC来将信号转换成上/下计数或计数/DIR。但是勘误表太可怕了。所以我试着避免它。有人能帮忙吗？ 以上来自于百度翻译 以下为原文 I have been Reading in the PIC32mz datasheet and FRM mainly the Timer/Counter and it doesnot seem to be able to decode quadrature encoder signals even if i use some logic ICs outside the micro to change the signal into UP/Down count or Count/Dir. I know that there is PIC32mk which contain QEI module. but the Errata is horrible. So i am trying to avoid it. Can anyone help ?
2018-12-26 16:09
大家好。我想知道是否可以使用具有感性负载的CS30电流感应放大器，即类似于自动汽车变速箱中使用的螺线管线圈。提前致谢。工作条件为12V，约为1至2A。以上来自于谷歌翻译以下为原文 Hello everyone. I would like to know if is possible to use the CS30 current sense amplifier with inductive loads, i.e. something similar to the coils of solenoids used in automatic car gearboxes. Thanks in advance.The operating conditions are 12V and about 1 to 2A.
2019-07-17 07:10
