索尼VAIO SVP1321N2EB 英特尔®酷睿™第4代i3-4010U处理器3M缓存，1.70 GHz4GB Ram（Maximun高达16GB Ram）三星M2 SSD 128GB一世1.升级
2018-11-20 11:31
他们使用我的东西，我的朋友没有任何问题。我正在使用Sony Vaio FIt 14“笔记本电脑（SVF14A16SGS），Windows 10 Home 64位（Build 17134）。蓝牙驱动程序
2018-10-19 11:48
嗨，我将无线蓝牙驱动程序更新到最新版本（20.70.0）。从那时起，蓝牙一直没有运作。它甚至在设备管理器中都不可见。在更新之前，一切都很顺利。已经尝试过： - 降级驱动程序（至20.60.0）， - 重新安装最新的驱动程序， - 重启我的电脑。虽然没有运气。我的设置：Intel（R）Core（TM）i5-4570S CPU @ 2.90GHz技嘉Z97N-Gaming 5NVIDIA GeForce GTX 750 TiWindows 10 Pro 64位（10.0，Build 17738）（内部版本）我还可以做些什么？附加SSO日志。intel.txt.zip 19.4 K.以上来自于谷歌翻译以下为原文Hi, I updated Wireless Bluetooth driver to the newest version (20.70.0). Bluetooth has not been working since then. It's not even visible in Device Manager.Everything was working great till the update. Already tried to: - downgrade the driver (to 20.60.0),- reinstall newest driver,- restart my pc. No luck though. My setup:Intel(R) Core(TM) i5-4570S CPU @ 2.90GHzGigabyte Z97N-Gaming 5NVIDIA GeForce GTX 750 TiWindows 10 Pro 64-bit (10.0, Build 17738) (insider build) what else can I do? SSO log attached. intel.txt.zip 19.4 K
2018-11-21 11:44
我最近购买了一台Intel NUC8i7BEH，使用16 GB的Crucial内存和240 GB的Samsung 970 EVO M.2 SSD。该系统运行良好，但有一个例外。加载Windows 10（W10）后，系统将不再识别要从中启动的USB。从历史上看。我从Acronis True Image USB密钥启动开始。这使我能够将当前的W10系统转移到M.2插槽上的Samsung 970 SSD上。这是我唯一能够从USB密钥启动的时间。我已经做了很多努力，并在互联网上广泛地寻找解决这个问题的方法，但没有找到任何有效的方法。尝试的解决方案如下。1.下载最新的BIOS BE0048.bio并将其加载到FAT32 USB密钥上，并使用电源按钮F4“BIOS恢复”方法更新NUC8i7BEH。 BIOS恢复正常，仍然无法从USB启动。启动时的F10选项显示我要从Acronis True Image启动的USB密钥，但字体为白色，任何从USB密钥启动的尝试只是返回到F10菜单。如果我选择内部970 SSD，则它会正常启动到W10。我正在运行BIOS，安全启动OFF。2.我还注意到，如果我进入传统启动，则永远不会列出传统启动USB密钥。我使用Rufus制作了一个FreeDOS传统启动密钥。这个键当然不能启动。3.我移除了跳线，以便我可以使用所有各种重置选项，这些都不起作用。4.我将跳线置于2,3位以擦除CMOS存储器。这也不起作用。我最后的努力是删除标准SSD和M.2 SSD。删除后，NUC从Acronis True Image或Fedora 28 Live Image USB密钥启动就可以了。此外，它还可以从传统的FreeDos USB密钥启动。注意，BIOS报告两个UFI启动的USB密钥，但不会报告传统的FreeDOS USB密钥。F10菜单没用。它总是报告基于UFI的USB密钥，但在任何情况下都不会从它们启动。 F10菜单不报告传统USB密钥，但如果您只是允许它继续而不按F10键，则NUC将从传统USB密钥启动。此外，F10键不允许我选择我要引导的两个SSD中的哪一个，它总是按照M.2插槽。为了从非M.2插槽启动，我必须进入并更改BIOS中的启动顺序。我直接向VisualBios团队报告了这一情况，但是在一周内没有收到回复。欢迎任何评论。以上来自于谷歌翻译以下为原文I recently purchased an Intel NUC8i7BEH, using 16 GB of Crucial memory, and 240 GB of Samsung 970 EVO M.2 SSD. The system works well with one exception. Once loaded with Windows 10 (W10), the system no longer recognizes a USB to boot from. Historically. I started out by booting from an Acronis True Image USB key. This enabled me to transfer my current W10 system onto the Samsung 970 SSD on the M.2 socket. This was the one and only time I was able to boot from a USB key. I have done do diligence and look far and wide on the Internet for solutions to this problem, and have found nothing that works. Solutions tried are as follows. 1. Download and load the latest BIOS, BE0048.bio, onto a FAT32 USB key, and updated the NUC8i7BEH using the Power Button F4 “BIOS Recovery” method. BIOS recovered correctly, still not able to boot from USB. The F10 option at startup shows the USB Key I want to Boot from, Acronis True Image, but the lettering is white, and any attempt to boot from the USB key just simply returns to the F10 menu. If I select the internal 970 SSD, then it boots normally to W10. I am running the BIOS with secure boot OFF. 2. I also notice that if I go to legacy boot, a legacy boot USB key is never listed. I made a FreeDOS legacy boot key using Rufus. This key of course does not boot. 3. I removed the jumper so that I could use all the various reset options, none of these worked either. 4. I put the jumper on position 2,3 to erase the CMOS memory. This did not work either. My very last effort was to remove both the standard SSD and the M.2 SSD. With both removed, the NUC booted from the Acronis True Image or a Fedora 28 Live Image USB key just fine. In addition, it also boots fine from from a legacy FreeDos USB key. Note, the BIOS reports both USB keys that are UFI boot, but will not report the legacy FreeDOS u*** key. The F10 menu is useless. It always reports the UFI based USB keys, but will not boot from them at all under any condition. The F10 menu does not report the legacy USB key, but the NUC will boot from the legacy USB key if you just allow it to proceed without pressing the F10 key. Also, the F10 key will not allow me to select which of my two SSDs I want to boot from, it always defers to the M.2 slot. In order to boot from the non-M.2 slot, I have to go in and change the boot order in the BIOS. I have reported this directly to the VisualBios team but have not received a reply in over a week. Any comments are welcome.
2018-10-18 11:49
你好先生，我用戴尔笔记本电脑。我试图安装xilinx软件，但我无法安装xilinx软件。请帮助我任何人，问候马诺
2020-03-09 08:18
当我打开Agilent IO Libraries套件（16.3）时“Agilent IO控件无法启动，因为与agilent io库服务通信时出现问题。状态摘要：0 = Agilent IO LibrariesSerivice状态0 = NkoSever状态0 = Nkosever工作Restary您的计算机如果问题仍然存在，请联系Agilent Technologies。“并让我重新启动我的工作台PC和Labtop。 Sooooooo我尝试重启我的电脑，但这也行不通。任何人都知道什么是错的，以及如何解决它？ Thx.Edited by：yo_0321 on May 1,2013 10:12 AM 以上来自于谷歌翻译 以下为原文When I open the Agilent IO Libraries suite (16.3) "The Agilent IO control could not start because there was a problem communicating with the agilent io libraries service. Status Summary: 0= Agilent IO LibrariesSerivice status 0= NkoSever status 0= Nkosever working Restaryyour computer and if the problem persists, contact Agilent Technologies." And ask me to reboot my bench PC and Labtop. Sooooooo I tried re-boot my PC, but this also doesn't work. Anybody have an idea what's wrong, and how to fix it? Thx.Edited by: yo_0321 on May 1, 2013 10:12 AM
2019-01-22 08:21
液晶电视如何发出自然光？LED背光技术的优势是什么？
2021-06-03 06:06
什么是蓝光光碟？
2021-11-04 07:45
LED的基本原理是什么？LED的技术趋势发展如何？LED的市场动态怎样？
2021-06-03 06:04
常用的一些Linux内核配置选项有哪些？引导模块支持子选项的配置方法有哪些？
2021-07-22 09:08
