\GRADUATIONPROJECT\AD7705_EG1.C(54): error C141: syntax error near '='..\GRADUATIONP
2015-01-22 15:44
出现了51HEI.C(32): error C141: syntax error near 'unsigned'51HEI.C(32):
2016-06-12 16:08
请问这是什么错误error c141:syntax error near，我双击信息栏也找不出问题。
2012-12-14 13:32
这个错误是什么问题？
2016-04-06 12:41
本帖最后由 风吹起的音乐 于 2016-2-20 12:20 编辑 本来开始我是个量程20V 200V的程序，后面我想加入个2V量程，加入了一些变量修改，结果出现错误。#includeunsigned char code dispbitcode[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};unsigned char dispbuf[4];unsigned int i;unsigned int j;unsigned int getdata;unsigned int temp;unsigned int temp1;unsigned char count;unsigned char d;***it ST=P3^0;***it OE=P3^1;***it EOC=P3^2;***it CLK=P3^3;***it P34=P3^4;***it P35=P3^5;***it P36=P3^6;***it P20=P2^0;***it P21=P2^1;***it P22=P2^2;***it P23=P2^3;***it P17=P1^7;***it s3=P2^7;***it s2=P2^6;***it s1=P2^5;#define_v2 {s1=0;s2=0;s3=1}#define_v20 {s1=1;s2=0;s3=0}#define_v200 {s1=0;s2=1;s3=0} unsigned char m;void TimeInitial();void Delay(unsigned int i);void TimeInitial(){ TMOD=0x10; TH1=(65536-200)/256; TL1=(65536-200)%256; EA=1; ET1=1; TR1=1; }void Delay(unsigned int i){unsigned int j;for(;i>0;i--){for(j=0;j
2016-02-20 12:18
void timer0(void) interrupt 1 using 1{TR0=0;CLK1=!CLK1;CLK2=!CLK2;for(m=0;m
2015-05-05 21:41
main.c(283): error C141: syntax error near 'unsigned', expected ')'这样的错误怎么改，求帮忙。。。。v
2014-06-18 09:13
试试.C(31): error C141: syntax error near 'unsigned'怎么改？#include#define uchar unsigned
2016-11-07 17:26
Flag_ERROR = 0;***it speak= P1^7
2017-04-11 10:16
想问问哪里错啊。/*电子密码锁*/#include#include#include#define uchar unsigned char#define uint unsigned int#define C02_write 0xa0 //c02 写地址#define C02_read 0xa1 //c02 读地址#define no0 0x28 //定义键码#define no1 0x14#define no2 0x24#define no3 0x44#define no4 0x12#define no5 0x22#define no6 0x42#define no7 0x11#define no8 0x21#define no9 0x41#define open 0x81#define modify 0x82#define enter 0x88#define backspace 0x84#define lcm_write_cmd_add XBYTE[0x80FF] //1602 控制地址#define lcm_write_data_add XBYTE[0x81FF]#define lcm_read_busy_add XBYTE[0x82FF]uchar idata temp5_password[6]={0x00,0x00,0x00,0x00,0x00,0x00};uchar idata key_code[]={no0,no1,no3,no4,no5,no6,no7,no8,no9};***it SCL=P3^0;***it SDA=P3^1;***it i=P3^2;***it led=P3^3;***it beep=P3^4;bit ack;void delay0(uchar x) // 延时函数{ uchar i; while(x--) { for (i = 0; i0;i--)for(j=124;j>0;j--);}void longdelay(uchar i){uint j;for(;i>0;i--)for(j=10000;j>0;j--);}void keysound() //按键声音函数{ uchar i; for (i=0;i
2017-06-10 01:14
