: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 0:0, read 64 by
2019-08-29 14:39
to initialize SPI flash at 0:0Booting from network ...*** ERROR: `serverip' not setWrong Image Format
2019-08-01 16:08
is initialize fail.ERROR: SPI flash probe failed by SPI device spi10.rt sfud flash
2022-10-09 14:33
;SPI1BUF = 0x00 ;BQ_READ_BUFFER[0] = SPI1BUF ; // Reading 3 dummy bytesBQ_READ_BUFF
2019-05-05 08:51
)!=HAL_OK) {Error_Handler();}if(HAL_SPI_Transmit(&hspi2,&databuffer[1],1,1000)!=HAL_OK
2021-05-14 20:43
is 0xFF[D/SFUD] (../rtthread/components/drivers/spi/sfud/src/sfud_sfdp.c:122) Error: Check SFDP signature
2022-07-15 10:19
) {//To be completed with either I2c or SPI reading function//i.e. *Data = SPI_Mems_Read_Reg( Reg
2018-11-21 08:46
RT，uart在测试的是cat节点默认就是echo功能，kernel/drivers/spi目录下只有spi-wk2xxx.o和spi-wk2xxx_64bit，没有源码，这个驱动不开源么？怎么解决uart
2022-07-04 09:38
written to the SPI and read from the SPI.This error ratio is when I Write 1000 byte
2019-05-15 11:18
) MBED_ERROR(status, "Error calling HAL_DSI_ConfigFlowControl()."); status = HAL_DSI_Read(hdsi
2022-12-16 07:20
