by other command. Read sf_cmd failed, already rd for 788480 bytes, read 256 each time R
2023-09-03 10:44
to RAM... && " \"sf probe 0 0 0 && " \"sf read 0x3000000 0x100000
2015-07-25 09:18
${fastboot_bytes} FB: ucmd echo rootfs done # Boot FB[-t 1000000]: ucmd sf read ${loadaddr} 0x100000 0x68b2e8 FB
2023-05-04 06:30
的 qspiboot 图像，结果相同。 我尝试检查QSPI flash，发现QSPI flash没有被擦除，我们使用sf erase命令后上面还有一些内容，我们使用sf read命令从Flash中读取内容到
2023-05-18 07:56
on given SPI bus and chip select sf read addr offset|partition len - read len\' bytes starting at offset
2024-01-10 06:51
;span]<span]后面还是要烧录的setenv bootcmd "sf probe 0;sf read 0x40000000 0x100000 0x400000;go
2021-02-07 16:00
正常msh >sf read 0 32Read the sf_cmd flash data success. Start from 0x00000000,
2023-03-07 14:07
RWA：（Read Write Access) RD用于開發的工具
2010-04-22 20:44
。根据手册，还需要在终端中setenvsetenv bootcmd 'sf probe 0;sf read 0x40000000 0x100000 0x500000;go 0x40000000';saveenv re
2022-06-18 18:01
。根据手册，还需要在终端中setenvsetenv bootcmd 'sf probe 0;sf read 0x40000000 0x100000 0x500000;go 0x40000000';saveenv re
2022-06-18 18:09
