DIR |=BIT3+BIT1+BIT4;P1OUT=BIT1+BIT3+BIT4; TA0CCR0=32768-1;//1
2018-11-25 22:25
+ WDTHOLD; // disable watchdog P1OUT = 0; // initialize LED off P1DIR = BIT0; // P1.0 output
2017-07-19 16:41
dis_init (void){P2SEL =0;P2DIR =0XFF;P1DIR |=BIT4+BIT5;}void dis(char xx,char y){ P1OUT
2015-04-27 15:10
总中断LPM3;//进入低功耗模式3while(1){ if(flag == 1) {P1OUT ^= BIT6;P1OUT ^= BIT0; flag = 0; }}
2019-04-12 06:35
;P1DIR|=(BIT0+BIT1+BIT2+BIT3+BIT4+BIT5);//P1.0-P1.5为输出方向P8DIR|=(BIT
2014-07-27 17:55
)t--;}void dis_init (void){P2SEL =0;P2DIR =0XFF;P1DIR |=BIT4+BIT5;}void dis(char xx,char y){
2015-04-29 21:24
buffer ready? UCA1TXBUF = UCA1RXBUF;// TX -> RXed character if(UCA1RXBUF=='1') {
2016-05-07 15:43
DIR=0xff;//P1全部接输出P1OUT=0x00;//接LED故全拉低P2DIR=0x00;//P2全部设为输入P
2013-08-16 21:15
#include #define SDA_1 P1OUT |= BIT7#define SDA_0 P1OUT &=~ BIT7#define SCL_1
2019-03-04 20:00
P1DIR = 0;P1OUT = 0;P1REN = 0xFF;各自代表什么意思？
2015-08-10 16:45
