附程序#include#define SDH P1OUT=BIT4;#define SD P1OUT &=~BIT4;#define ST_CKH P1OUT |=BIT5;#define
2013-12-02 18:53
+ WDTHOLD; // disable watchdog P1OUT = 0; // initialize LED off P1DIR = BIT0; // P1.0 output
2017-07-19 16:41
请问P5OUT &= ~(1
2019-03-19 03:47
Timer_A(void) { if(P1OUT&BIT7) { P1OUT &=~(BIT7); EB_GND_Key; } else { P1OUT |=BIT7
2012-11-22 16:17
DIR |=BIT3+BIT1+BIT4;P1OUT=BIT1+BIT3+BIT4; TA0CCR0=32768-1;//1
2018-11-25 22:25
附程序，搞了我两天累死了 #include#define SDH P1OUT=BIT3;#define SD P1OUT &=~BIT3;#define ST_CKH P1OUT
2013-12-03 13:26
;P1DIR|=(BIT0+BIT1+BIT2+BIT3+BIT4+BIT5);//P1.0-P1.5为输出方向P8DIR|=(BIT
2014-07-27 17:55
#include #define SDA_1 P1OUT |= BIT7#define SDA_0 P1OUT &=~ BIT7#define SCL_1
2019-03-04 20:00
dis_init (void){P2SEL =0;P2DIR =0XFF;P1DIR |=BIT4+BIT5;}void dis(char xx,char y){ P1OUT
2015-04-27 15:10
#include //#include #define pinCLK_1 P1OUT |= BIT6 //时钟输入端#define pinCLK_0 P1OUT &
2016-07-01 11:10
