automatically - you will need to examine the Makefile yourself and ensure# that the appropriate
2023-01-04 08:38
if you delivered it and change it yourself it voids the warranty. I currently have a closed loop
2018-11-29 16:04
优化一下，设置编译器如下：配置后在编译一下工程；看，是不是优化了许多，但是ucos效果是一样的。如下。Over。enjoy yourself !!!!不知道说没说清除，其实还是非常简单的。
2019-04-19 06:35
can't find any section which suggests to implement the XADC AXI4Lite I/O planning by yourself. Could
2018-11-01 16:07
application, you may find yourself asking “Does every component I use in my automotive product need
2018-10-24 14:32
;Generate Application" yourself.If you get the error as I did, disable the first page
2018-09-07 15:00
我想用Android应用程序接口B2B-WFWT-01XBee来打开和关闭设备，我想用PIC16F87A作为控制器 以上来自于百度翻译 以下为原文 I want to interface XB2B-WFWT-001 Xbee with android app to switch on and off device , i want to use pic16f877a as controller
2018-09-27 15:02
喜任何人都可以告诉我如何创建.ngo文件。它可以在ise 9.2i上完成谢谢以上来自于谷歌翻译以下为原文hi,can any one tell me how to create an .ngo file.can it be done on ise 9.2i thanks
2019-01-14 14:06
我看到PSoC3支持UART Bootloader函数。这对我的设计很有帮助。但是我的设备是RS-485 I/F，它是半双工的。我徘徊如果创建者可以提供一个新的引导装载模块。我认为这并不难。 以上来自于百度翻译 以下为原文 I see that PSOC3 supports UART Bootloader function. It is very helpful for my design. But my device is RS-485 I/F, which is half-duplex. I wander if the Creator can provide a new Bootloader module. I think it is not very difficult.
2019-07-18 14:38
由于Spartan（xcs40）没有IDCODE，如何在iMPACT的边界扫描模式下单击“Initiallize chain”时检测xcs40设备？ （我知道spartan3有IDCODE，所以iMPACT使用IDCODE检测spartan3）谢谢！以上来自于谷歌翻译以下为原文Since Spartan (xcs40) does not have IDCODE, how to detect xcs40 device when click "Initiallize chain" on Boundary scan mode of iMPACT? (I know spartan3 has IDCODE, so iMPACT detect spartan3 using IDCODE ) Thank you!
2019-05-27 14:02
