//I2C初始化void I2c_Init(void){CLK_PeripheralClockConfig(CLK_PERIPHERAL_I2C,ENABLE);I2C
2022-02-21 06:19
void I2C_Init(uint32 fi2c){ if(fi2c>4000)fi2c = 400000; PINSEL0 = (PINSEL0&0x
2014-05-15 12:06
I2C_init() //I2C初始化信号{ SDA=1; delay(1); SCL=1; delay(1);}void I2C_stop() //I2C结束信号{
2016-10-05 17:35
/*I2C³õʼ»¯º¯Êý*/void i2c_init(){I2C_InitTypeDef I2C_Struct;RCC_APB1PeriphClockCmd
2016-08-05 14:59
stm32f051的i2c需要外接上拉电阻吗，直接用内部上拉行不行，还有库中的I2C_Init函数中有这么一句/* Enable I2Cx Peripheral */I2
2019-03-12 07:14
/PB21GPIOB_ModeCfg( GPIO_Pin_20 | GPIO_Pin_21, GPIO_ModeOut_PP_5mA); //GPIO_ModeIN_PU );主机I2C_Init
2022-05-17 06:28
); I2C_DeInit(I2C1); I2C_Init(I2C1, 10000, 0x38, I2C_Mod
2024-05-14 08:06
CLK_HSIPrescalerConfig（CLK_PRESCALER_HSIDIV1）; // 16MHz时钟I2C_Init（400000,0xA0，I2C_DUTYCYCLE_2
2018-10-22 16:24
发送完器件地址的高四位便停止了。请高手帮忙解决。void I2C_Init(void){ I2C0CON = 0x00;//stop communication,acknowledgment data
2012-08-13 14:56
_Mode =I2C_Mode_I2C; I2C_InitStructure.I2C_OwnAddress1 =0xd0; I2C_Init(I2C1,
2024-04-26 07:41
