在debug时，出现C28xx:Error connecting to the target:(Error -1135 @ 0x0)The emulator reported an error.
2019-11-06 11:48
调试6678过程中，给两个核烧写程序，烧完出现如下错误：Error connecting to the target(Error - 1143 @0x0)C66xx_0: Error
2018-06-21 04:25
我使用ccs10调试msp430f5529的时候出现：Error connecting to the target: Unknown device有没有解决办法
2021-04-12 14:09
CCS7.3 /CC3220S-LAUNCHPAD: (Error -1170 @ 0x0) Unable to access the DAP) Error connecting
2018-06-21 15:38
Error connecting to the target: Error 0x00001200/-1145 Error during: OCS, Target,Unrecoverable emulation err
2013-09-09 16:37
Checking target voltage... Target voltage: 3.31 V Listening on TCP/IP port 2331 Connecting to
2024-02-27 06:32
，Connecting to MPLAB ICD 3...Currently loaded firmware on ICD 3Firmware Suite
2017-07-21 13:10
各位大神请教一下，DM8168加载不了程序时报connecting to the target信息错误，详细错误如图片所致，复位信号reset和por没有问题・_・?如附件图所示，上电时序按照数据手册3.3-1.0_avs_1.0con_1.8来上电，晶振27mh
2019-04-19 13:20
;HPM6750XVMX\" selected. Connecting to target via JTAG Could not measure total IR len. TDO
2024-02-16 09:32
板子型号 6750evk2 使用jlinkv11 链接板子后，jlink 亮起红灯，在ses中报错如下： Connecting ‘J-Link’ using ‘USB’ Loaded C
2023-05-26 06:12
