ARL和ARI脚是用来音频输入的吗？怎么有的资料是接耳机。。。这两个孔应该是接话筒的吧？
2013-09-06 11:34
set frequency and measured frequency divided by the set frequency was roughly 0.1 ppm Can I declare that to be the accuracy of my test? Ari
2018-12-03 10:05
支持双精度浮点，但是。。打个比方，ST（或者ARM）的软件库等像是顾兮笑兮的泳装美女，温柔而亲切；TI的则像是西装革履的黑脸大汉，效率、精确且强壮。。我该去拥抱哪个？。。。
2019-01-14 07:54
的原语。弧-有一个仪表小部件消失-窗口小部件可以中心窗口窗口标题你找到有用的ARI与最后的GOL（图形对象库）？谢谢你 以上来自于百度翻译 以下为原文 Hello,I'm trying
2018-12-19 15:47
我从和谐开始。我正在使用“ARI Quas明星”的例子。我需要配置一个RPT触摸显示器。我无法找到和谐的帮助细节是什么参数是每个司机触摸。我在这里附上一个带有参数的图像。请帮忙。谢谢。
2020-03-12 12:39
嗨，我有一个触摸显示器与SSD1963和XPT2046控制器上。现在我需要一个司机的XPT2046与SPI通信。什么是最好的起点，司机使用ARI？谢谢！ 以上来自于百度翻译 以下为原文 Hi,i
2018-11-01 10:14
();sda=1;_nop_();_nop_();returntemp;}void read_rtc()//阅读时钟{uchar /*i,*p,*/amiao,afen,ashi,ari,ayue
2014-04-07 09:11
字体是24大小的校准，我也设置了粗体，斜体和ANTY别名。它看起来像右边的炭失去了一些像素。注意附件上的“0”标志。类似的是Z和I字母。（我猜想，所有字符都在字符位图中与右边对齐）
2020-03-17 09:30
和声的图形产生一个叫做“LabARIa”和“HAL”的文件夹。请参阅附件屏幕截图。我用英语字典检查了“LiBARA”和“HAL”。但是英语字典什么都不教我。似乎这些都是缩写词。我不是英语本族语者。你是什么意思“LIBARIAL”？你说“哈尔”是什么意思？这些词的由来是什么？任何建议都让我高兴。 以上来自于百度翻译 以下为原文 Graphics of Harmony generates the folder called "libaria" and "hal" . Please see the attached screenshot.I examined "libaria" and "hal" by using English dictionary.But English dictionary teach me nothing.It seems that these are something like abbreviation.I am not native English speaker.What do you mean "libaria" ?What do you mean "hal" ? What is origin of these words ?Any advise make me pleased.ysaito Attached Image(s)[img][/img]
2019-03-26 15:17
背景：MPLAB X IDE 3.65、XC32 V1.43、和声V2.03B、定制板使用PIC32 MZ2064 DAH176、NEWHAVEN NHD-4.3-48022EF-ASXNα-T显示（4.3）、480X227像素、4线触摸触摸屏等，我理解切换屏幕是一种计算昂贵的方法，但我对什么是好奇完成事情的最佳实践？这就是我要做的。首先，创建启动飞溅屏幕。这是非常好的，因为我使用的是内置的硬件加速。这个屏幕将持续大约4-5秒，然后转换到主屏幕。我注意到每个屏幕都会有3个新的层，因为开关屏幕会把所有东西都拆掉，重新开始。问题是，当它必须转变时，你可以看到LCD涂料。咖啡制造商的演示也是如此。让我的主屏幕仅仅是另一个层，然后在幕后移除旧的引导飞溅层会更好吗？此外，从主屏幕，我将有按钮，将用户到不同的配置屏幕，并回到完成。这应该是一个新的屏幕还是另一个层？ 以上来自于百度翻译 以下为原文 Background: MPLAB X IDE 3.65, XC32 v1.43, Harmony v2.03b, custom board using PIC32MZ2064DAH176, Newhaven NHD-4.3-480272EF-ASXN#-T display (4.3", 480x272 pixel, 4 wire resitive touchscreen) I understand that switching screens is a computationally expensive method, but I am curious as to what are the best practices for getting things done? Here is what I'm looking to do. First, create a boot splash screen. This has worked extremely well now that I use the hardware acceleration that is built in. This screen would last about 4-5 seconds and then transition to a main screen. I noticed that each screen gets 3 new layers as switching screens will tear everything down and start anew. The problem is that you can see the LCD paint when it has to transition. This is true of the coffee maker demo as well. Would it be better to make my main screen just another layer and then remove the old boot splash layer behind the scenes? Also, from the main screen, I will have buttons that will take the user to different configuration screens and back upon completion. Should this be a new screen or another layer?
2019-02-14 15:13
