_StopBits = USART_StopBits_1; USART_InitStructure.USART_Parity = USART_Parity
2020-06-19 09:00
本文以USART1为例，叙述串口中断的编程过程。1、先来讲述一下在应用串口中断时涉及到的一些库文件。首先对于STM32外设库文件的应用编程，misc.c和stm32f10x_rcc.c是肯定要添加到
2014-03-28 15:43
_WordLength = USART_WordLength_8b; USART_InitStructure.USART_StopBits = USART_StopBits_1;
2015-01-02 15:30
λÊý¾Ý³¤¶ÈUSART_InitStructure.USART_StopBits = USART_StopBits_1;//Ò»¸öֹͣλUSART_InitStructure.USART_Parity
2016-08-20 11:13
_StopBits_1;USART_InitStruct.USART_Parity = USART_Parity_No ;USART_InitStruct.USART_Mode =
2014-08-03 14:52
_WordLength_8b; USART_InitStructure.USART_StopBits = USART_StopBits_1; USART_InitStructure.USART_Parity =
2012-11-26 18:06
只需设置USART_BRR=0x19B即可。 在初始化USART之后，发现串口并没有数据输出。初始化代码如下：#include"stm32f10x.h"#include"
2018-07-02 00:03
_Mode_Rx|USART_Mode_Tx;uusart.USART_Parity=USART_Parity_No;uusart.USART_StopBits=
2018-09-24 12:12
_StopBits_1;USART_InitStructure.USART_Parity = USART_Parity_No;USART_InitStructure.USART
2018-03-08 11:08
我用stm32f030的Usart中断方式为什么始终进不了中断，求高手指点，谢谢！代码如下：void USART1_Configuration(void){ USART
2018-11-14 09:04
