when samp bit is set AD1CON1bits.AD12B = 1; // 12-bit ADC operation AD1CON1bits.SIM
2019-05-15 14:18
Control: Sampling begins immediately after conversion AD1CON1bits.AD12B = 1; // 12-bit ADC operation
2019-04-19 13:14
FIFO is only 10 bit wide, is it actually possible to run the accelerometer with 12 bit resolution? #
2018-09-26 17:52
) AD1CON1bits.AD12B = 1; // 12-bit ADC operation ////?? AD1CON1bits.ADDMABM = 0; // DMA buffers are built
2019-05-28 11:21
AD1CHS0bits.CH0NB = 0; AD1CHS0bits.CH0SB = 0b000001; IFS0bits.AD1IF = 0; // Clear the A/D interrupt flag bit
2018-12-13 16:38
- 2112x1568 with step 8/8[19]: 'RG12' (12-bit Bayer RGRG/GBGB) Size: Stepwise 32x16 - 2112x1568
2021-12-30 06:27
大家好，你们中有人尝试使用AD1CON2寄存器中的OFACK位校准12bit ADC吗？12位ADC数据表没有多少说明。第一个附件。当试图获得ADC偏移量时，我总是测量设置为CHCH0SA的内容
2019-10-30 10:49
来自于百度翻译 以下为原文My sensor interface supports 12-bit pixel output. Is it possible to get all 12-bit data
2018-11-30 16:14
)- FIFO_CTRL_REG_A set to 0x40 (FIFO mode)Anyone who have a sequence of register settings which gives 12-bit
2018-09-10 17:18
; EvbRegs.GPTCONB.bit.TCOMPOE=1; EvbRegs.T3PR=0x1D4C; EvbRegs.T3CMPR=0x0EA6; EvbRegs.T3CNT=0; EvbRegs.T3CON.b
2014-05-09 09:43
