。编辑：米罗于2013年2月11日上午4:31 Pic2.jpg1.0 MBPic3.jpg1.3 MB 以上来自于谷歌翻译 以下为原文My HP83640A has had a tough
2019-04-22 15:58
的序列号已经注册，我无法进入页面创建帐户，因此我可以生成我需要的许可证文件在服务器上安装此产品。帮帮我？以上来自于谷歌翻译以下为原文I am having a really tough time
2018-10-12 11:47
resources at http://support.zilinx.com." Seems to be tough to get around.Haven't nailed down steps
2019-05-05 11:26
我的客户想知道CyPress是否有一个UBWebCAM参考设计解决方案？（包括PSoC上的软件驱动）在传感器分辨率方面，1MP应该工作。我们的重点是在图像质量之前获得光和小。 以上来自于百度翻译 以下为原文 My customer was wondering if Cypress has a USB*** reference design solutions? (including software driver on a board with PSoC) In terms of sensor resolution, 1Mp should work. Our focus is to get light and small ahead of image quality.
2019-04-02 15:43
It is tough to know where the actual packet transmit is happening. Any help is appreciated. Thanks,Ted
2019-07-01 07:30
我与一个PSoC 4开发系统，和（也许是愚蠢的）要符合FDA的要求。我们已经有了PalpOft C/C++测试，我希望有人能给我指出正确的开始方向。我想我需要一种方法来产生用于建立一个批处理文件。我可以把它输入C/C++测试，并生成代码的测试。有接受者吗？谢谢，约翰以上来自于百度翻译 以下为原文I'm developing with a PSoC 4 system, and (perhaps foolishly) trying to comply with FDA requirements. We already have Parasoft C/C++Test in-house, and I was hoping someone could point me in the right direction for getting started. I think I basically need a way to generate a batch file for the build. I can feed that into C/C++Test and generate tests for the code.Any takers? Thanks,John
2018-08-15 01:05
? Which is the best when things get tough?Thanks in advance for everyone who willshare his or hers
2018-09-30 11:09
主持人，请让我知道是否有一个更合适的地方来发布这个问题：我需要创建一个项目的固件，并意识到我不会完成自己。它涉及：免费实时操作系统温度测量与PID控制计数脉冲与同频测量几种数字输入几种数字输出PWM几种情况结构（状态机）步进电机（仅由PSoC驱动脉冲）未来：4.3“显示触摸屏和蓝牙到Android这将是一个有偿的项目，可以马上开始。如果你在西雅图，那就太好了，但最终并不重要。处理器是PSoC 4（先锋工具包）或PSoC 5。谢谢，比尔 以上来自于百度翻译 以下为原文Moderators, please let me know if there is a more appropriate place to post this question: I need to create some firmware for a project and realizing that I will not finish myself.It involves: Free RTOS Temperature measurement and PID Control Counting pulses and measuring frequesncy from same Several digital imputs Several Digital outputs PWM Several cases structures (state machine) Stepper motors (with drivers so only pulses from PSoC) Future: 4.3" display with touch screen and Bluetooth to Android This would be a paid project and could start right away.It would be great if you were in Seattle but in the end it really does not matter. Processor is PSoC 4 (pioneer kit) or PSoC 5. Thanks, Bill
2019-07-18 09:22
我目前正在使用IBERT 7系列GTP v3.0 r15测试Artix 7 FPGA（xc7a50tcsg325-2）的GTP收发器，我对结果感到非常困惑。在此特定测试中，收发器未连接（打开）并配置为6.25Gbps，MGTREFCLK1上的125MHz时钟，我正在查看近端环回结果：请注意，在这两个测试之间唯一的选项是环回模式，我在两种情况下都重置了发送器和接收器。从UG482第2章环回部分（特别是图2-22环回测试概述）我得出结论，当近端PMA没有显示错误时，近端PCS环回应该没问题，如果近端PMA失败则近端PMA应该失败近端PCS有错误，但显然结论是错误的......我在这里想念的是什么？问题是什么？提前致谢，赫伯特--------------是的，我这样做是为了好玩！以上来自于谷歌翻译以下为原文I'm currently testing the GTP tranceivers of an Artix 7 FPGA (xc7a50tcsg325-2) with IBERT 7 Series GTP v3.0 r15 and I'm very confused by the results. In this specific test, the tranceivers are not connected (open) and configured to 6.25Gbps with a 125MHz clock on MGTREFCLK1 and I'm looking at the Near-End Loopback results: Note that the only option changed between those two tests is the loopback mode and that I did reset the transmitter and receiver in both cases. From UG482, chapter 2, section Loopback (specifically Figure 2-22 Loopback Testing Overview) I would conclude that the Near-End PCS loopback should be fine when the Near-End PMA shows no errors and the Near-End PMA should fail if the Near-End PCS has errors, but obviously that conclusion is wrong ... What am I missing here?What is the problem? Thanks in advance,Herbert-------------- Yes, I do this for fun!
2019-05-05 14:30
的R＆amp; D想法吗？我相信它会成为热门话题。更严重的是，没有人有好主意解决这个问题吗？问候，文森特 以上来自于谷歌翻译 以下为原文Dear Experts, Here is a tough
2018-11-14 17:03
